Asset UPnP for QNAP

[dikkiedirk]

Re: Asset UPnP for QNAP

Is there also a build that runs on a TS-639? I tried the Intel build in the OP, but get wrong architecture.

[Spoon]

Re: Asset UPnP for QNAP

We have no Intel 32 bit build sorry.

[dikkiedirk]

Re: Asset UPnP for QNAP

pity. can't you built one?

[Spoon]

Re: Asset UPnP for QNAP

To build one we have to buy this unit, I do not think there are popular enough to warrant such a build.

[kg648]

Re: Asset UPnP for QNAP

Hi Spoon,

I have held off all weekend to ask this question but... :D

Do you need any more information from me to try and diagnose the issue from the previous page?

Thanks.

[Spoon]

Re: Asset UPnP for QNAP

We hope to have a new test build soon.

[michel-rose]

Re: Asset UPnP for QNAP

Any (playlist or upnp), you add the radio station to the playlist and set to play, after around 20 seconds you should hear it, if not try a different station.

Sorry, cannot get radio working, even after more then 20 seconds still no music. Tried different radio stations, same result.
According to the logfile (from memory since i forgot to copy) the connection cannot be opened...
I can copy part of the logfile tonight (UTC +07:00) and post it if that might help...

michel

[Declaration]

Re: Asset UPnP for QNAP

hi spoon
i haved installed the latest beta for my TS-212. When i try to acces then the configuration page in the internet explorer. it still says page doesnt found
honstly. no version work before
but iam still on hope
Mike

[PeterP]

Re: Asset UPnP for QNAP

Sorry, cannot get radio working, even after more then 20 seconds still no music. Tried different radio stations, same result.
According to the logfile (from memory since i forgot to copy) the connection cannot be opened...
I can copy part of the logfile tonight (UTC +07:00) and post it if that might help...

michel

Please mail a log file to the address at http://www.dbpoweramp.com/email.htm . Thanks.

[PeterP]

Re: Asset UPnP for QNAP

hi spoon
i haved installed the latest beta for my TS-212. When i try to acces then the configuration page in the internet explorer. it still says page doesnt found
honstly. no version work before
but iam still on hope
Mike

[ also relevant to anyone else having the same problem - configuration page entirely inaccessible ]

1. *DISABLE* the Asset app to make sure it's not running, using QNAP App Center.

2. Please log in to your QNAP unit using SSH.

http://wiki.qnap.com/wiki/How_to_SSH_into_your_QNAP_device

3. Navigate to your Asset QPKG installation directory.
Example:
cd /share/HDA_DATA/.qpkg/Test8/bin
Exact path may vary depending on your QNAP model (the "HDA_DATA" part - some configurations use "MD0_DATA" instead) and Asset version (the "Test8" part) installed.

4. Run Asset manually
./AssetUPnP
If it fails to start up, it ought to show some useful information bits there.
Please post what exactly the console says after starting Asset.
In order to quit the running Asset process you've started, press Ctrl+C.

[Sourav Mazumder]

Re: Asset UPnP for QNAP

Testing the same. All fine except streaming 192/24 Flac files. I am using Pioneer Elite N 30 as streamer. I've the streamer connected to the NAS over AC router and router bridge.

The sound is crackling with lot of noise.

All other works fine. But having hi res 192/24 support is important.

I don't have this problem with the same setup with Twonky.

Any way I can increase the buffer at Asset's size to solve this problem ?

Regards,
Sourav

[flyingfufu]

Re: Asset UPnP for QNAP

[ also relevant to anyone else having the same problem - configuration page entirely inaccessible ]

1. *DISABLE* the Asset app to make sure it's not running, using QNAP App Center.

2. Please log in to your QNAP unit using SSH.

http://wiki.qnap.com/wiki/How_to_SSH_into_your_QNAP_device

3. Navigate to your Asset QPKG installation directory.
Example:
cd /share/HDA_DATA/.qpkg/Test8/bin
Exact path may vary depending on your QNAP model (the "HDA_DATA" part - some configurations use "MD0_DATA" instead) and Asset version (the "Test8" part) installed.

4. Run Asset manually
./AssetUPnP
See what the console says afterwards. If it fails to start up, it ought to show some useful information bits there.
In order to quit the running Asset process you've started, press Ctrl+C.

Hi All,

Owner of a TS-419P+ und 4.1.0, I was never able to open the web so far. Trying the above is not solving the issue.

I see the Asset process starting (eating approx 40% at the beginning) then a second Asset process being created upon request to open the webpage. But nothing else happens.
Asset is also not appearing on any media renderer.

Hope this helps.

[Spoon]

Re: Asset UPnP for QNAP

As a test (if you can) connect the QNAP and pioneer without the AC plugs.

[PeterP]

Re: Asset UPnP for QNAP

Hi All,

Owner of a TS-419P+ und 4.1.0, I was never able to open the web so far. Trying the above is not solving the issue.

I see the Asset process starting (eating approx 40% at the beginning) then a second Asset process being created upon request to open the webpage. But nothing else happens.
Asset is also not appearing on any media renderer.

Hope this helps.

If you have started Asset manually like my post instructed you to, please post what the console says after doing so. Thanks.

[PeterP]

Re: Asset UPnP for QNAP

Testing the same. All fine except streaming 192/24 Flac files. I am using Pioneer Elite N 30 as streamer. I've the streamer connected to the NAS over AC router and router bridge.

The sound is crackling with lot of noise.

All other works fine. But having hi res 192/24 support is important.

I don't have this problem with the same setup with Twonky.

Any way I can increase the buffer at Asset's size to solve this problem ?

Regards,
Sourav

Thank you for your feedback.

What exact QNAP model are you running Asset on?