.asx to .mp3?

[Spoons]

Re: .asx to .mp3?

and don't forget the beta ver4 aux input here: bet4

with smart length if you know the lenght before hand then this is the accurate way

quote from the help file:

For those who are lucky enough to have the Power Pack help is at hand to improve recordings when using Auto Start / End options:
Smart Track Length is a Power Pack option which will enable Auto End to more accurately function. Each track length can be set and dMC will only look for the end track quiet spell after that time has elapsed (minus 5 seconds), why do this? well if you had set the dMC to Auto End after 3 seconds of silence and you happened to have a music piece which had 3 seconds worth of silence in the middle of the track then it will end incorrectly! To type a Smart Track Length, select the first track (was called Track 1) and type the length:

To jump straight to Track 2 simply press Enter after typing your Seconds and it will jump down. Smart Track Length can also be used with the Auto End option switched off and the resulting recording will be exactly the Smart Track Length specified. Tip: If using Smart Track Length and Auto End the auto end detection period can be reduced from 3 seconds to more accurately pickup a track ending.

Another enhancement Power Pack offers is correct adding and removal of Auto Start / End sound data. Let me elaborate - taking Auto Start first, if the recording was set to begin after 750 ms (3/4 second) worth of sound then the Power Pack is smart enough to remember this 750 ms of sound data so it appears at the beginning of the file being recorded. The opposite is also true for Auto End, if 3000 ms (3 seconds) of quiet is required to end a recording then

[Unregistered]

Re: .asx to .mp3?

Hi!

The recording solution is quite good, I think, but when I do it, it doesn't give any sound. When I listen to what I've recorded (from Windows Media Player 9), I don't hear anything.

Does anyone know what the problem is? Thank you very much!

[ChristinaS]

Re: .asx to .mp3?

Can you listen to any other audio file through WMP? If not, then you may have to check the Master Volume Controls by right-clicking on the volume icon in the task bar. Make sure nothing is muted and the Volume sliders are up, especially for the Master Volume itself for Playback (check options). See if there's a separate place to check for headphones or speakers.

For Recording check that Stereo Mix (or some such term) is selected in the Volume control.

BTW, the Volume Master Control panel and all the terms may differ depending on your particular soundcard, but in general this is where you have to look.

[Unregistered]

Re: .asx to .mp3?

Thank you for the response. I can listen to other audio files, because I listened to the song I wanted to record when I recorded it, too. But when I've recorded the song and I double clicked it, it plays, but doesn't give any sound.

Thanks in advance for the answer.

[Spoons]

Re: .asx to .mp3?

when in dmc auxiliary input can click on "test recording levels" and hear the recording levels/sound? i suspect your sound setup isn't quite right as christinas suggested.

[Unregistered]

Re: .asx to .mp3?

I don't hear anything when testing the recorder, that is correct. But it's strange then I can hear anything else I play on my computer, don't you think?

[Spoons]

Re: .asx to .mp3?

no not strange at all

basically re read what christinaS said above.

so when you have your audio properties control panel open so you can see what is selected and not. try different combinations whilst you have the record test going so you will know when you have selected the right properties.

i might post some screen shots for better example.

[Unregistered]

Re: .asx to .mp3?

Also strange, I can't scroll the bar from the volume of recording. That's locked, like it seems. In my sound setup there's one thing that says recordvolume, but I can't change that. Although the volume is somewhere in the middle (so it's not with no sound), could that be the problem?

[Unregistered]

Re: .asx to .mp3?

Thank you very much in advance.

[Spoons]

Re: .asx to .mp3?

sometimes a pic says it all see if this one makes sense.

[Unregistered]

Re: .asx to .mp3?

Now it works! You are the best, you know that?

Thank you so much!

[Spoons]

Re: .asx to .mp3?

ah i see you got some of our magic dust lol, ok good news it's working! come back anytime if you have more issues.

[Unregistered]

Re: .asx to .mp3?

I will, cause here you can get the real good solutions! Thanks! Have a good night!

[Unregistered]

Re: .asx to .mp3?

One more thing, the soundquality of the recorded song is very low, although I set it in CD quality. Do you have a solution for that too?

[ChristinaS]

Re: .asx to .mp3?

One more thing, the soundquality of the recorded song is very low, although I set it in CD quality. Do you have a solution for that too?

In Volume control, check properties for recoding before you use Auxiliary Input- I bet the voume slider is way down.