title
Products            Buy            Support Forum            Professional            About            Codec Central
 

Unable to install latest version after purchasing update

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave A

    • Apr 2018
    • 5

    Unable to install latest version after purchasing update

    I purchased dBpoweramp Reference R16 after having an older version for years.
    I tried to install it on the same PC that I had dBpoweramp Reference R12.4 installed on. Tried it without uninstalling the older version first and it failed. I uninstalled everything (program and codecs), restarted the PC and tried it again. It still fails.
    I am getting the following message on my Windows 7 PC:
    Cannot install C:/Program files/dBPoweramp/dBConfig.exe, disk may be full
    I have over 400 GB of free space on the PC.
    I paid $20 to upgrade so I would get the latest version of FLAC.
    If this is not going to work for me, then you can cancel the upgrade order and refund my money. I will go back to my previous version that was working just fine. Seems ridiculous to have to post in a forum about this, but that's today's customer service for you.
  • Spoon
    Administrator
    • Apr 2002
    • 44509

    #2
    Re: Unable to install latest version after purchasing update

    >Cannot install C:/Program files/dBPoweramp/dBConfig.exe, disk may be full

    Something on your system is stopping the installer from writing this file, it will be your security software blocking the file.
    Spoon
    www.dbpoweramp.com

    Comment

    • mville
      dBpoweramp Guru

      • Dec 2008
      • 4021

      #3
      Re: Unable to install latest version after purchasing update

      In addition to Spoon's post, I have just asked some more questions here in post no. 6:
      Re: dBpoweramp Reference R16.4 display error messages at installation

      An example of why it is not a good idea to double post.

      Comment

      • Dave A

        • Apr 2018
        • 5

        #4
        Re: Unable to install latest version after purchasing update

        Originally posted by Spoon
        >Cannot install C:/Program files/dBPoweramp/dBConfig.exe, disk may be full

        Something on your system is stopping the installer from writing this file, it will be your security software blocking the file.
        Well, that is not what I am finding at all. I turned off Malwarebytes and Avast and am getting the sane exact message:
        Cannot install C:/Program files/dBPoweramp/dBConfig.exe, disk may be full

        Again, as stated in my initial post, this is a Windows 7 PC and I can install my previous version with NO problem.
        I'll give this just a few more days before I go through PayPal to get my money back, because this new version does not seem to be compatible with my computer and I'm not paying $20 for NOTHING.

        Comment

        • mville
          dBpoweramp Guru

          • Dec 2008
          • 4021

          #5
          Re: Unable to install latest version after purchasing update

          Originally posted by Dave A
          Well, that is not what I am finding at all. I turned off Malwarebytes and Avast and am getting the sane exact message:
          Cannot install C:/Program files/dBPoweramp/dBConfig.exe, disk may be full
          Have you tried installing in safe mode?

          Comment

          • Dave A

            • Apr 2018
            • 5

            #6
            Re: Unable to install latest version after purchasing update

            Originally posted by mville
            Have you tried installing in safe mode?
            Why would I have to install ANY program in safe mode? Is this program meant to be compatible with Windows 7 Home Premium? If so, I should be able to install it just like any other program. I reinstalled my previous version just fine.
            If your installer has a problem that would require me to have to install it in safe mode, then I don't want it and will be expecting a $20 refund.

            Comment

            • Spoon
              Administrator
              • Apr 2002
              • 44509

              #7
              Re: Unable to install latest version after purchasing update

              The installer used to install dBpoweramp has been used on around 30 million computers. The operation of copying a file from the install to your HDD is as simple as it gets, there is no special configuration, however it is possible to have a system where other things stop this simple operation. There is nothing the installer can do to get around this block.

              The suggestion to try safe mode to install is a good one, safe mode only loads the minimum of programs and drivers to get windows started.

              BTW the same installer is used for R12...
              Spoon
              www.dbpoweramp.com

              Comment

              • mville
                dBpoweramp Guru

                • Dec 2008
                • 4021

                #8
                Re: Unable to install latest version after purchasing update

                Originally posted by Dave A
                Why would I have to install ANY program in safe mode? Is this program meant to be compatible with Windows 7 Home Premium? If so, I should be able to install it just like any other program. I reinstalled my previous version just fine.
                If your installer has a problem that would require me to have to install it in safe mode, then I don't want it and will be expecting a $20 refund.
                It is not my installer. The installer is working fine for many, many users, so it's a case of troubleshooting, hence the questions I asked here in post no. 6:
                dBpoweramp Reference R16.4 display error messages at installation

                If you can't install in Safe Mode, you either have a problem with your system, or the downloaded install file. If you can install in Safe Mode, then you probably have an issue with your installed 3rd party software, hence Spoon's post no. 2, in this thread.
                Last edited by mville; April 23, 2018, 10:41 AM. Reason: More info

                Comment

                • Spoon
                  Administrator
                  • Apr 2002
                  • 44509

                  #9
                  Re: Unable to install latest version after purchasing update

                  >If you can't install in Safe Mode, you either have a problem with your system, or the downloaded install file

                  It cannot be the installer download, before running the installer self checks byte for byte, if the installer is not complete, or corrupted then it will not run, this error is shown near the end of the install.
                  Spoon
                  www.dbpoweramp.com

                  Comment

                  • Dave A

                    • Apr 2018
                    • 5

                    #10
                    Re: Unable to install latest version after purchasing update

                    Originally posted by Spoon
                    >If you can't install in Safe Mode, you either have a problem with your system, or the downloaded install file

                    It cannot be the installer download, before running the installer self checks byte for byte, if the installer is not complete, or corrupted then it will not run, this error is shown near the end of the install.
                    Well, your advice proved to be solid. I was able to install the program in Safe Mode. After I restarted the system and ran the program, I realized that I needed the Tag from Filename codec. I downloaded it and attempted to install it and got the same error message I received when attempting to do a normal install of the program. So back to Safe Mode where I was able to install it. Now I just need to figure out what on earth is causing this issue. I've tried all kinds of scans and troubleshooters and have not come up with anything unusual. If you have any suggestions, please let me know.
                    One thing I was disappointed in with the new version of the program is the lack of a Shorten decoder for the 64 bit version. It's something that I would rarely use, but actually just had one of those rare occasions last week. Would be great if you could get one to work with the 64 bit architecture. The new version of the program is quite an improvement over my good old version 12.4.
                    Cheers

                    Comment

                    • mville
                      dBpoweramp Guru

                      • Dec 2008
                      • 4021

                      #11
                      Re: Unable to install latest version after purchasing update

                      Originally posted by Dave A
                      Well, your advice proved to be solid. I was able to install the program in Safe Mode. After I restarted the system and ran the program, I realized that I needed the Tag from Filename codec. I downloaded it and attempted to install it and got the same error message I received when attempting to do a normal install of the program. So back to Safe Mode where I was able to install it. Now I just need to figure out what on earth is causing this issue. I've tried all kinds of scans and troubleshooters and have not come up with anything unusual. If you have any suggestions, please let me know.
                      You can use msconfig to disable all non-microsoft services and start-up items, to help you troubleshoot the issue, similar to running in safe mode.

                      I would start by disabling all anti-virus and security software related services and startup items and see if the Illustrate software installs ok.

                      ... how did you turn off Malwarebytes and Avast in post no. 4?
                      Last edited by mville; April 25, 2018, 07:08 AM. Reason: extra question

                      Comment

                      Working...

                      ]]>