Pinoneer DVR-S21LBK + USB 3 != Secure Rip

[Hcat]

Dear Forum-goers and those in the know,

I have a Nimbie NB21 (but the robot is not the issue here, I'm just mentioning it to provide ocmplete information) that has a SATA to USB 3.0 bridge running a Pinoneer DVR-S21LBK.

Windows devices information:

USBSTOR\CdRomPIONEER_DVD-RW__DVR-221L1.00
USBSTOR\CdRomPIONEER_DVD-RW__DVR-221L
USBSTOR\CdRomPIONEER_
USBSTOR\PIONEER_DVD-RW__DVR-221L1
PIONEER_DVD-RW__DVR-221L1
USBSTOR\GenCdRom
GenCdRom

Running on DBPoweramp R15 64bit, connected via USB 3.0.

1) Ripping with accurate rip and burst mode results in accurate rips.
-> The CD is fine
-> The computer is fine
-> The USB 3.0 is fine
-> The Pioneer drive can indeed extract audio good enough to match the accurate checksum.

2) Ripping with secure mode results in immediate errors:

dBpoweramp Release 15 Digital Audio Extraction Log from Tuesday, 29 April, 2014 18:29

Drive & Settings
----------------

Ripping with drive 'D: [PIONEER - DVD-RW DVR-221L]', Drive offset: 6, Overread Lead-in/out: No
AccurateRip: Active, Using C2: Yes, Cache: 1024 KB, FUA Cache Invalidate: No
Pass 1 Drive Speed: Max, Pass 2 Drive Speed: Max
Ultra:: Vary Drive Speed: No, Min Passes: 1, Max Passes: 3, Finish After Clean Passes: 1
Bad Sector Re-rip:: Drive Speed: Max, Maximum Re-reads: 34

Encoder: FLAC -compression-level-5

Extraction Log
--------------

Track 1: ERROR Ripping LBA 0 to 28650 (6:22) in 0:06. Filename: C:\Home\MUSIC\Richard D. James\Analogue Bubblebath 4\01 Aphex Twin - Elephant Song.flac
Unable to read CD, check CD disc (frame LBA 0 ripping 26 frames track end LBA 28650)

Track 2: ERROR Ripping LBA 28650 to 55990 (6:04) in 0:06. Filename: C:\Home\MUSIC\Richard D. James\Analogue Bubblebath 4\02 Aphex Twin - Gibbon.flac
Unable to read CD, check CD disc (frame LBA 28650 ripping 26 frames track end LBA 55990)

Track 3: ERROR Ripping LBA 55990 to 79100 (5:08) in 0:06. Filename: C:\Home\MUSIC\Richard D. James\Analogue Bubblebath 4\03 Aphex Twin - Cuckoo.flac
Unable to read CD, check CD disc (frame LBA 55990 ripping 26 frames track end LBA 79100)

Track 4: ERROR Ripping LBA 79100 to 116710 (8:21) in 0:05. Filename: C:\Home\MUSIC\Richard D. James\Analogue Bubblebath 4\04 Aphex Twin - Sloth.flac
Unable to read CD, check CD disc (frame LBA 79100 ripping 26 frames track end LBA 116710)

Track 5: ERROR Ripping LBA 116710 to 118780 (0:27) in 0:05. Filename: C:\Home\MUSIC\Richard D. James\Analogue Bubblebath 4\05 Aphex Twin - Knievel.flac
Unable to read CD, check CD disc (frame LBA 116710 ripping 26 frames track end LBA 118780)

--------------

5 Tracks Could Not Be Ripped

I don't know what to do to try to fix this. I have tried various secure rip settings, all with no success.

-> I have made an ISO of an audio CD using this hardware setup and then compared the audio cd with the ISO, with 100% reported accuracy of the ISO image.

I would be very happy if someone who has some ideas on what is going on and/or how to correct the secure ripping issue would post their thoughts.

I thank you kindly,

H.Cat

[Spoon]

Re: Pinoneer DVR-S21LBK + USB 3 != Secure Rip

Switch c2 pointers off.

[Hcat]

Re: Pinoneer DVR-S21LBK + USB 3 != Secure Rip

THANK YOU!
Secure ripping works now.

You wrote it, and you know your software, that's for sure. =)

May I inquire: is this an issue with USB-connected drives in general or an illness of these Pioneer DVR units?

Again, thank you kindly.

H.Cat

[Spoon]

Re: Pinoneer DVR-S21LBK + USB 3 != Secure Rip

Will be a combination of system + USB + drive. If you want to experiment there is a check box for 8KB transfers you can try checking with C2.