title
Products            Buy            Support Forum            Professional            About            Codec Central
 
Results 1 to 5 of 5

Thread: CD change is often not recognized

  1. #1

    Join Date
    Dec 2018
    Location
    Germany
    Posts
    42

    CD change is often not recognized

    I bought a new PC just for ripping CDs.
    Since the new PC I have the problem that CD Ripper often does not read the CD after inserting it.
    About every second time the CD is not read. (The PC always recognizes the removal.)
    I often have to click the rescan button three or four times before the CD is read.

    The PC has four drives via external SATA and 2 via internal SATA - and CD Ripper is started six times.
    I've been doing this for 4 years without any problems. But very often the new PC does not update the CD change.
    The recognition does not follow a logical pattern.

    Does anyone know whether a screw has to be set on Windows?
    Could that be because of the SATA cards?
    But the problem appears on the internal as well as external drives. And these are different SATA card manufacturers.

  2. #2
    Administrator
    Join Date
    Apr 2002
    Posts
    41,518

    Re: CD change is often not recognized

    It is likely to be the interface, or drivers for the SATA, have a look in the bios and see if can put the SATA in a different mode.

  3. #3

    Join Date
    Dec 2018
    Location
    Germany
    Posts
    42

    Re: CD change is often not recognized

    Thank you.
    But unfortunately there is no way to change this in the bios.
    Also, some CDs hang when reading MusicBrainz. If you eject the CDs, the ejection is not recognized.

  4. #4
    Administrator
    Join Date
    Apr 2002
    Posts
    41,518

    Re: CD change is often not recognized

    You can uncheck musicbrainz and see if that helps.

  5. #5

    Join Date
    Dec 2018
    Location
    Germany
    Posts
    42

    Re: CD change is often not recognized

    The update 17.2 to 17.3 solved all problems.
    The CD change is now recognized immediately with 17.3.
    With the 17.2 it sometimes took a minute (or more) to recognize a CD. The 17.3 recognizes the CDs in a few seconds as soon as they are inserted.
    We already had doubts about the new PC.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •