title
Products            Buy            Support Forum            Professional            About            Codec Central
 
Results 1 to 3 of 3

Thread: Accurate Rip Problem - SATA UHD in USB3 Enclosure

  1. #1
    TLBradbury's Avatar
    Join Date
    Apr 2011
    Location
    Seattle, WA, USA
    Posts
    16

    Exclamation Accurate Rip Problem - SATA UHD in USB3 Enclosure

    I have a Pioneer BDR-211UBK UHD (4K) drive that I had to install in an external USB3 enclosure (Vantec NST-536S3-BK) due to the lack of 5.25 bays on my new system. I was able to get dBpoweramp configured for Accurate Rip just fine, but nothing I rip will match the Accurate Rip checksums. While the results are always a secure rip, they won't match.

    The drive itself is a step up from my previous (BDR-2209). I am getting frustrated with the current situation, and I am now ripping on my old box again to be certain of accuracy. I don't know if this is due to the drive being in the external USB enclosure, but I would be happy to provide any information that might lead to a solution.
    Last edited by TLBradbury; 05-18-2018 at 12:07 PM. Reason: Typo

  2. #2
    Administrator
    Join Date
    Apr 2002
    Posts
    41,125

    Re: Accurate Rip Problem - SATA UHD in USB3 Enclosure

    Try disabling C2 pointers if you have them enabled.

  3. #3
    TLBradbury's Avatar
    Join Date
    Apr 2011
    Location
    Seattle, WA, USA
    Posts
    16

    Re: Accurate Rip Problem - SATA UHD in USB3 Enclosure

    Bingo! That did the trick.

    Thanks, Spoon!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •