title
Products            Buy            Support Forum            Professional            About            Codec Central
 

dMC Causes system power down

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gershond

    • Feb 2005
    • 5

    dMC Causes system power down

    Hi,

    I'm using dMC to convert high bitrate mp3s down to 128.
    After running for a few minutes, my pc suddenly just turns itself off, as if I pulled the plug out. No warnings, no messages, it just shuts down. I've been using dMC for a long time, and I've never seen anything like this before. It doesn't even matter which files I try to convert.

    I just installed the latest dMC and LAME, but no help
    I'm running WinXP SP2 on an Athlon XP 2500+.

    Any help?

    Thanks,
    -Gershon
  • ChristinaS
    dBpoweramp Guru

    • Apr 2004
    • 4097

    #2
    Re: dMC Causes system power down

    Originally posted by gershond
    Hi,

    I'm using dMC to convert high bitrate mp3s down to 128.
    After running for a few minutes, my pc suddenly just turns itself off, as if I pulled the plug out. No warnings, no messages, it just shuts down. I've been using dMC for a long time, and I've never seen anything like this before. It doesn't even matter which files I try to convert.

    I just installed the latest dMC and LAME, but no help
    I'm running WinXP SP2 on an Athlon XP 2500+.

    Any help?

    Thanks,
    -Gershon
    Try a test conversion, no write.

    What are the specs of your input mp3 files and those you want for output?
    Channels, frequency, bitrate, cbr, abr, or vbr?

    And what Priority of conversion are you using?

    Comment

    • gershond

      • Feb 2005
      • 5

      #3
      Re: dMC Causes system power down

      test conversion works ok

      The files I've tried are 2 channel stereo, 44 KHz, CBR 320 or 160 Kbps CBR

      I'm trying to convert them to 128Kbps CBR, Joint Stereo, 44100 Hz, no DSP, Preserve ID, normal priority.

      Thanks

      Comment

      • ChristinaS
        dBpoweramp Guru

        • Apr 2004
        • 4097

        #4
        Re: dMC Causes system power down

        Originally posted by gershond
        test conversion works ok

        The files I've tried are 2 channel stereo, 44 KHz, CBR 320 or 160 Kbps CBR

        I'm trying to convert them to 128Kbps CBR, Joint Stereo, 44100 Hz, no DSP, Preserve ID, normal priority.

        Thanks
        Use below normal priority. Maybe you have to convert in 2 steps also, because your'e going from 2-stereo to joint stereo, it's possible it may not like it. First just lower the bitrate and then go to joint stereo.

        Comment

        • Bill41
          dBpoweramp Enthusiast

          • Nov 2004
          • 56

          #5
          Re: dMC Causes system power down

          Originally posted by gershond
          Hi,

          I'm using dMC to convert high bitrate mp3s down to 128.
          After running for a few minutes, my pc suddenly just turns itself off, as if I pulled the plug out. No warnings, no messages, it just shuts down. I've been using dMC for a long time, and I've never seen anything like this before. It doesn't even matter which files I try to convert.

          I just installed the latest dMC and LAME, but no help
          I'm running WinXP SP2 on an Athlon XP 2500+.

          Any help?

          Thanks,
          -Gershon
          Hey! I am having serious problems trying to convert my collection from WMA into MP3; everytime I do, it get's through a few files, maybe 5-20 and then either my computer just immediately restarts or dBPowerAmp crashes. When it crashes, the Windows XP error info reports that the error occurred in wmadmod.dll. Does anyone have

          Comment

          • gershond

            • Feb 2005
            • 5

            #6
            Re: dMC Causes system power down

            Instead of joint stereo, I've selected [source], and my computer is much happier for it. I'm not gonna bother with joint stereo.

            Thanks so much for the help!

            Comment

            • Spoon
              Administrator
              • Apr 2002
              • 44575

              #7
              Re: dMC Causes system power down

              It is likely that your computer is overheating, check the CPU temperature, if it is over 60 deg C then it is too high.
              Spoon
              www.dbpoweramp.com

              Comment

              • gershond

                • Feb 2005
                • 5

                #8
                Re: dMC Causes system power down

                Just kidding... it's happening again.

                Overheating is probably the best explanation, although it is strange that I've done this and other CPU intensive activities dozens of times before without problems.

                Is there anything I can do about it?

                Comment

                • LtData
                  dBpoweramp Guru

                  • May 2004
                  • 8288

                  #9
                  Re: dMC Causes system power down

                  Originally posted by gershond
                  Just kidding... it's happening again.

                  Overheating is probably the best explanation, although it is strange that I've done this and other CPU intensive activities dozens of times before without problems.

                  Is there anything I can do about it?
                  1. Do the fans in the computer make weird noises?
                  2. Open the side of your case and put a floor fan blowing into it on high speed. Does this keep it from crashing?
                  3. Buy a new CPU Heatsink/Fan. Note: If you've never installed one before, get someone who knows how to do it, especially with Athlon XPs.

                  Comment

                  • neilthecellist
                    dBpoweramp Guru

                    • Dec 2004
                    • 1288

                    #10
                    Re: dMC Causes system power down

                    open up your case, find the CPU right after your computer shuts down. Feel it. If it burns, it overheated. Get a cooler. :-)

                    Comment

                    • gershond

                      • Feb 2005
                      • 5

                      #11
                      Re: dMC Causes system power down

                      I finally got around to getting a new cooler, and I've had no problems since (except that my system's a bit louder now...)

                      Thanks all for the help.

                      Comment

                      Working...

                      ]]>