title
Products            Buy            Support Forum            Professional            About            Codec Central
 

Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) column?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Max Dread
    dBpoweramp Enthusiast

    • Dec 2013
    • 297

    Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) column?

    Hi all

    Just playing around with R16.4 trial at the moment, after having used R14.4 for the last few years...

    Has anything changed with regards to gapless ripping? I rip to FLAC and mp3 using the Multi-Encoder. I was just listening to an album I ripped a couple of days ago and there are gaps between tracks which sound a little odd. But I no longer have the CD and therefore cannot compare it against the rips, so it could be the CD itself. It got me to thinking though... I never had any gapless issues with R14.4.

    Also, what is the Gap (Pre-Track) column for? Is it purely information only? I read on another forum where someone said/asked: "In one of the more popular set-up guides for EAC, it was strongly suggested that you run Gap Detection before ripping. dBpoweramp will only do this if you add the "Gap (Pre-Track)" column to the display. Is gap detection important? Do you do this in dBpoweramp?" That got me thinking too....

    Any gapless thoughts and clarifications most welcome.

    Cheers

    Max

    PS - I am using foobar for playback, in its virgin state. I have only just recently installed the OS and have not got around to setting up and configuring foobar yet.
  • Spoon
    Administrator
    • Apr 2002
    • 44583

    #2
    Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

    All CD Ripping programs rips every track gaplessly if ripping to a lossless format.
    Spoon
    www.dbpoweramp.com

    Comment

    • Max Dread
      dBpoweramp Enthusiast

      • Dec 2013
      • 297

      #3
      Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

      OK. So what happens with mp3s?

      And also, any comment on the Gap (Pre-Track) column? Is it purely information?

      Ta

      Comment

      • garym
        dBpoweramp Guru

        • Nov 2007
        • 5907

        #4
        Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

        Originally posted by Max Dread
        OK. So what happens with mp3s?
        Lame mp3 files have gapless info in the header. In my own case, I can verify that these mp3 files play gapless on all my players.

        Comment

        • Max Dread
          dBpoweramp Enthusiast

          • Dec 2013
          • 297

          #5
          Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

          Yes, I must say that I also have not had a problem with mp3s on my iPod. So all good there. (Well, I say that... But I recently bought a Arcam drDock and that seems to be doing a little bit of truncating on tracks when in shuffle mode. I've never had a dock do that before. But that's another subject). I'm just hoping that nothing is different now that I am using R16.4.

          The rip I have that I mention in post *1 with the dodgy gapless... I'll get in touch with the guy who bought the CD and ask if he would mind having a listen and seeing what the CD itself sounds like in comparison.

          In the meantime:

          Originally posted by Max Dread
          What is the Gap (Pre-Track) column for? Is it purely information only? I read on another forum where someone said/asked: "In one of the more popular set-up guides for EAC, it was strongly suggested that you run Gap Detection before ripping. dBpoweramp will only do this if you add the "Gap (Pre-Track)" column to the display. Is gap detection important? Do you do this in dBpoweramp?" That got me thinking too....
          Cheers

          Comment

          • garym
            dBpoweramp Guru

            • Nov 2007
            • 5907

            #6
            Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

            Short answer. No. There is no gap detection in dbpoweramp. Avoiding all that stuff is why I moved from eac to dbpa.

            Comment

            • Max Dread
              dBpoweramp Enthusiast

              • Dec 2013
              • 297

              #7
              Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

              OK, great. Whoever wrote that must have been confused then, unless of course this is something that DBPA used to have/do. I think it was from an old thread of quite a few years ago.

              So presumably then the "Gap (Pre-Track)" column is 100% just for information purposes and simply just reports how the CD has been written / mastered?

              Cheers

              Comment

              • garym
                dBpoweramp Guru

                • Nov 2007
                • 5907

                #8
                Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                Originally posted by Max Dread
                OK, great. Whoever wrote that must have been confused then, unless of course this is something that DBPA used to have/do. I think it was from an old thread of quite a few years ago.

                So presumably then the "Gap (Pre-Track)" column is 100% just for information purposes and simply just reports how the CD has been written / mastered?

                Cheers
                Then I must be wrong. But I've not seen a setting in dbpa for gap detection (I guess because I've not added the column you mention). In any case, without changing any settings, all my thousands of rips deal with gapless tracks perfectly.

                Comment

                • Spoon
                  Administrator
                  • Apr 2002
                  • 44583

                  #9
                  Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                  There is a DSP effect which uses those values to remove the pre track silences. However, if a CD is gapless by definition (that is one track plays straight to 2nd track with no silence), it will not have any inter-track silences on the disc.
                  Spoon
                  www.dbpoweramp.com

                  Comment

                  • Max Dread
                    dBpoweramp Enthusiast

                    • Dec 2013
                    • 297

                    #10
                    Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                    Originally posted by Max Dread
                    The rip I have that I mention in post *1 with the dodgy gapless... I'll get in touch with the guy who bought the CD and ask if he would mind having a listen and seeing what the CD itself sounds like in comparison.
                    I got in touch with him and he has just responded to say that the gap is there on the CD as well. Some dodgy mastering methinks! Sorry for the confusion. I guess it was just bad timing that I should pick a CD to rip first that had poor gapless...

                    Originally posted by garym
                    Then I must be wrong. But I've not seen a setting in dbpa for gap detection (I guess because I've not added the column you mention). In any case, without changing any settings, all my thousands of rips deal with gapless tracks perfectly.
                    I've not seen a setting either and presume there isn't one. It's just the column which you can choose to have (or not).

                    Originally posted by Spoon
                    There is a DSP effect which uses those values to remove the pre track silences. However, if a CD is gapless by definition (that is one track plays straight to 2nd track with no silence), it will not have any inter-track silences on the disc.
                    Right, ok. So the column gives the values as they've been authored/mastered on the CD. And this has no affect on the rip, unless the DSP Effect is used, which uses these numbers to do its deed.

                    Is that correct?

                    Comment

                    • garym
                      dBpoweramp Guru

                      • Nov 2007
                      • 5907

                      #11
                      Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                      Originally posted by Max Dread
                      Right, ok. So the column gives the values as they've been authored/mastered on the CD. And this has no affect on the rip, unless the DSP Effect is used, which uses these numbers to do its deed.

                      Is that correct?
                      Yes. Correct.

                      Comment

                      • mville
                        dBpoweramp Guru

                        • Dec 2008
                        • 4021

                        #12
                        Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                        Originally posted by Max Dread
                        I was just listening to an album I ripped a couple of days ago and there are gaps between tracks which sound a little odd.
                        there are gaps between tracks which sound a little odd, in what way?

                        Comment

                        • Max Dread
                          dBpoweramp Enthusiast

                          • Dec 2013
                          • 297

                          #13
                          Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                          Originally posted by garym
                          Yes. Correct.
                          Great, thanks for confirming.

                          Originally posted by mville
                          there are gaps between tracks which sound a little odd, in what way?
                          It sounds to me like the first track should go straight into the second track. If you can bear some black metal for a moment, take a listen here:



                          Track 1 end just after the minute mark and there is a BRIEF silence between it and Track 2. On the CD/rip, that silence gap is around 2 - 3 seconds long. And it sounds terrible. It just so happened to be one of the first rips I did after switching to Win7 (from XP), and R16.4 (from R14.4), and so when I heard it I just feared that it might be something to do with the change over.

                          Cheers

                          Comment

                          • Jailhouse
                            dBpoweramp Guru

                            • Sep 2016
                            • 388

                            #14
                            Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                            Originally posted by Max Dread
                            It sounds to me like the first track should go straight into the second track. [...] I just feared that it might be something to do with the change over.
                            I have some CDs that I presume have bad indexing, to the effect that when ripping the end of one track is cut off and prepended to the beginning of the next track. With gapless playback, there is no problem when playing the tracks consecutively, but playing either one by itself results in a truncated song or one with an odd beginning. I think this may be what you're experiencing.

                            Because I normally have foobar2000 playback set to Random, this is annoying.* I fix the problem by opening the tracks in a music editor and moving the errant bit of music to the track it belongs in. (I use Sound Forge. Audacity, which is free, would probably also work.) Incidentally, TEST CONVERSION indicates the files are not corrupted, but I'd bet they would no longer pass inspection by AccurateRip.


                            *I have a 2010 Yardbirds greatest hits compilation CD set which exhibits this problem across several tracks on one of the disks. Moomph.
                            Last edited by Jailhouse; February 23, 2018, 05:01 PM. Reason: Missing word

                            Comment

                            • mville
                              dBpoweramp Guru

                              • Dec 2008
                              • 4021

                              #15
                              Re: Gapless ripping: any changes in recent DBPA versions? What is Gap (Pre-Track) col

                              Originally posted by Jailhouse
                              I have some CDs that I presume have bad indexing, to the effect that when ripping the end of one track is cut off and prepended to the beginning of the next track. With gapless playback, there is no problem when playing the tracks consecutively, but playing either one by itself results in a truncated song or one with an odd beginning. I think this may be what you're experiencing.

                              Because I normally have foobar2000 playback set to Random, this is annoying.* I fix the problem by opening the tracks in a music editor and moving the errant bit of music to the track it belongs in. (I use Sound Forge. Audacity, which is free, would probably also work.) Incidentally, TEST CONVERSION indicates the files are not corrupted, but I'd bet they would no longer pass inspection by AccurateRip.
                              You are correct, AccurateRip would probably report Track Different Length Than CD Original.

                              Comment

                              Working...

                              ]]>