hangs on last CD-track

[soundnerd]

Dear developpers and users

I´m just testing the dBpoweramp cd-ripper (R15) on MacOSx (10.9.5) with several audioCDs, converting them into FLACs (level 6).
Reading and converting works fine, but always on the last track of the CD, the ripper stops at 99% track extraction and is hung.
Canceling is not possible, the programm will show "working" but neither releases the CD, nor quits its process.
The file is being written but without audio content (only 170kb) and not playable.
I can only quit the program via forced program shutdown (Command-alt-ESC)
Is this a bug? Any ideas how to solve this?

Thank you very much,
Andreas


Here´s an excerpt from the LOG:

_____________
dBpoweramp Digital Audio Extraction Log from 2015-05:16 18:26:39

Drive & Settings
----------------

Ripping with drive 'disk1 [HL-DT-ST - DVDRW GS23N]', Drive offset: 667, Overread Lead-in/out: Yes
AccurateRip: Active, Using C2: Yes, Cache: 39 KB, FUA Cache Invalidate: No
Pass 1 Drive Speed: Max, Pass 2 Drive Speed: Max
Ultra:: Vary Drive Speed: No, Min Passes: 1, Max Passes: 3, Finish After Clean Passes: 1
Bad Sector Re-rip:: Drive Speed: Max, Maximum Re-reads: 34

Encoder: FLAC -compression-level-6
DSP Effects / Actions: -dspeffect1="ReplayGain=-r128 -r128lufs={qt}-23{qt}"

Extraction Log
--------------
__________________________________

Switching DSP on or off doesn´t have an effect.

[Spoon]

Re: hangs on last CD-track

>Overread Lead-in/out: Yes

Your drive most likely does not support overreading, uncheck the option please.

[soundnerd]

Re: hangs on last CD-track

Thank you, Spoon. That was the culprit!
Now it works.