Logfile

[jamstyle]

Hi,

Fo the Logfile I have the following settings under Secure Settings -> Secure Extraction Log

Report Contents: Complete
Write To File: activated
Log Filename: [rippedtopath]\Log.txt

I ripped a CD and i get the following Logfile:
D:\Music\dbpoweramp\FLAC\Albums & Singles\Horny United\Horny United - Crazy Paris (CDS-GER)\Log.txt

The problem is that in this Lofile contains also the information of previous CD Ripps

dBpoweramp Release 14.1 Digital Audio Extraction Log from Samstag, 18. Juni 2011 06:34

Drive & Settings
----------------

Ripping with drive 'G: [HL-DT-ST - DVDRAM GH22NS40 ]', Drive offset: 667, Overread Lead-in/out: No
AccurateRip: Active, Using C2: Yes, Cache: 1024 KB, FUA Cache Invalidate: No
Pass 1 Drive Speed: Max, Pass 2 Drive Speed: Max
Ultra:: Vary Drive Speed: No, Min Passes: 1, Max Passes: 2, Finish After Clean Passes: 1
Bad Sector Re-rip:: Drive Speed: Max, Maximum Re-reads: 60

Encoder: [Multi Encoder] -enc1="FLAC=-compression-level-5" -encMopt1=" -tofolder={mqt}D:\Music\dbpoweramp\FLAC{mqt} -dynamic={mqt}[IFCOMP]VA & OST\[album]\[IFMULTI]Disc [disc]\[][track] - [artist] - [title][][IF!COMP]Albums & Singles\[IFVALUE]album artist,[album artist],[artist][]\[IFVALUE]album artist,[album artist],[artist][] - [album]\[IFMULTI]Disc [disc][]\[track] - [title][]{mqt}" -encDSP1="-dspeffect1={mqt}ReplayGain=-albummode={qt}0{qt}{mqt} -dspeffect2={mqt}ID Tag Processing=-case={qt}0{qt} -exportart={qt}(none){qt} -importart={qt}[filename].jpg{qt} -maxart={qt}(any){qt} -arttojpg{mqt} -dspeffect3={mqt}Playlist Writer=-type={qt}m3u{qt} -titles={qt}[title]{qt} -writepath={qt}C:\Users\G008994\Music\{qt} -filename={qt}Playlist{qt}{mqt}"
DSP Effects / Actions: -dspeffect1="_MultiEncoder="

Extraction Log
--------------

Track 1: Ripped LBA 0 to 19182 (4:15) in 0:33. Filename: D:\Music\dbpoweramp\Dru Hill\Tell Me (CDS-EU)\01 Dru Hill - Tell Me (LP Version).IGNORE
Secure [Pass 1, Ultra 1 to 1]
CRC32: 20D49B47 AccurateRip CRC: 7726A492 (CRCv2) [DiscID: 004-000306cd-000c1622-31041504-1]

Track 2: Ripped LBA 19182 to 41335 (4:55) in 0:27. Filename: D:\Music\dbpoweramp\Dru Hill\Tell Me (CDS-EU)\02 Dru Hill - Tell Me (Bounce Version).IGNORE
Secure [Pass 1, Ultra 1 to 1]
CRC32: A0382369 AccurateRip CRC: B190FDD2 (CRCv2) [DiscID: 004-000306cd-000c1622-31041504-2]

Track 3: Ripped LBA 41335 to 59432 (4:01) in 0:20. Filename: D:\Music\dbpoweramp\Dru Hill\Tell Me (CDS-EU)\03 Dru Hill - Tell Me (Student Mix).IGNORE
Secure [Pass 1, Ultra 1 to 1]
CRC32: 670E26FE AccurateRip CRC: 45397AE0 (CRCv2) [DiscID: 004-000306cd-000c1622-31041504-3]

Track 4: Ripped LBA 59432 to 78400 (4:12) in 0:20. Filename: D:\Music\dbpoweramp\Dru Hill\Tell Me (CDS-EU)\04 Dru Hill - Tell Me (Instrumental).IGNORE
Secure [Pass 1, Ultra 1 to 1]
CRC32: 6CDD4AF4 AccurateRip CRC: 8AD5FC77 (CRCv2) [DiscID: 004-000306cd-000c1622-31041504-4]

--------------

4 Tracks Ripped Securely


====================

dBpoweramp Release 14.1 Digital Audio Extraction Log from Freitag, 24. Juni 2011 11:00

Drive & Settings
----------------

Ripping with drive 'G: [HL-DT-ST - DVDRAM GH22NS40 ]', Drive offset: 667, Overread Lead-in/out: No
AccurateRip: Active, Using C2: Yes, Cache: 1024 KB, FUA Cache Invalidate: No
Pass 1 Drive Speed: Max, Pass 2 Drive Speed: Max
Ultra:: Vary Drive Speed: No, Min Passes: 1, Max Passes: 2, Finish After Clean Passes: 1
Bad Sector Re-rip:: Drive Speed: Max, Maximum Re-reads: 60

Encoder: [Multi Encoder] -enc1="FLAC=-compression-level-5" -encMopt1=" -tofolder={mqt}D:\Music\dbpoweramp\FLAC{mqt} -dynamic={mqt}[IFCOMP]VA & OST\[album]\[IFMULTI]Disc [disc]\[][track] - [artist] - [title][][IF!COMP]Albums & Singles\[IFVALUE]album artist,[album artist],[artist][]\[IFVALUE]album artist,[album artist],[artist][] - [album]\[IFMULTI]Disc [disc][]\[track] - [title][]{mqt}" -encDSP1="-dspeffect1={mqt}ReplayGain=-albummode={qt}0{qt}{mqt} -dspeffect2={mqt}ID Tag Processing=-case={qt}0{qt} -exportart={qt}(none){qt} -importart={qt}[filename].jpg{qt} -maxart={qt}(any){qt} -arttojpg{mqt} -dspeffect3={mqt}Playlist Writer=-type={qt}m3u{qt} -titles={qt}[title]{qt} -writepath={qt}C:\Users\G008994\Music\{qt} -filename={qt}Playlist{qt}{mqt}"
DSP Effects / Actions: -dspeffect1="_MultiEncoder="

Extraction Log
--------------

Track 1: Ripped LBA 0 to 15249 (3:23) in 0:16. Filename: D:\Music\dbpoweramp\Horny United\Crazy Paris (CDS-GER)\01 Horny United - Crazy Paris [Radio Mix].IGNORE
AccurateRip: Accurate (confidence 1) [Pass 1]
CRC32: 1B209C4C AccurateRip CRC: 3F80144C [DiscID: 004-00038f37-000e72a5-1f04cf04-1]
AccurateRip Verified Confidence 1 [CRCv1 3f80144c]
AccurateRip Verified Confidence 1 [CRCv1 3f80144c]

Track 2: Ripped LBA 15249 to 48067 (7:17) in 0:20. Filename: D:\Music\dbpoweramp\Horny United\Crazy Paris (CDS-GER)\02 Horny United - Crazy Paris [Original Club Mix].IGNORE
AccurateRip: Accurate (confidence 2) [Pass 1]
CRC32: CD99D310 AccurateRip CRC: 1979C323 [DiscID: 004-00038f37-000e72a5-1f04cf04-2]
AccurateRip Verified Confidence 2 [CRCv1 1979c323]
AccurateRip Verified Confidence 2 [CRCv1 1979c323]

Track 3: Ripped LBA 48067 to 77622 (6:34) in 0:16. Filename: D:\Music\dbpoweramp\Horny United\Crazy Paris (CDS-GER)\03 Horny United - Crazy Paris [Syke 'N' Sugarstarr Remix].IGNORE
AccurateRip: Accurate (confidence 1) [Pass 1]
CRC32: F4BBEBFE AccurateRip CRC: AA3721E0 [DiscID: 004-00038f37-000e72a5-1f04cf04-3]
AccurateRip Verified Confidence 1 [CRCv1 aa3721e0]
AccurateRip Verified Confidence 1 [CRCv1 aa3721e0]

Track 4: Ripped LBA 77622 to 92333 (3:16) in 0:07. Filename: D:\Music\dbpoweramp\Horny United\Crazy Paris (CDS-GER)\04 Horny United - Café de Paris.IGNORE
AccurateRip: Accurate (confidence 1) [Pass 1]
CRC32: DC3ED2D7 AccurateRip CRC: EF1918D6 [DiscID: 004-00038f37-000e72a5-1f04cf04-4]
AccurateRip Verified Confidence 1 [CRCv1 ef1918d6]
AccurateRip Verified Confidence 1 [CRCv1 ef1918d6]

--------------

4 Tracks Ripped Accurately

For each Ripp I like to have one Logfile. What do I wrong?

Greetz

[Spoon]

Re: Logfile

When you first ripped

D:\Music\dbpoweramp\Dru Hill\Tell Me (CDS-EU)\01 Dru Hill - Tell Me (LP Version)

Where did the log file for that one go?

[jamstyle]

Re: Logfile

It goes to D:\Music\dbpoweramp\Dru Hill\Tell Me (CDS-EU)\Log.txt

[jamstyle]

Re: Logfile

In the past I ripped to D:\Music\dbpoweramp and now to D:\Music\dbpoweramp\FLAC

After ripping I move the files to:
D:\Music\Source FLAC\CDS
D:\Music\Source FLAC\OST
D:\Music\Source FLAC\VA
.....

Litte example for the problem:
The logfile contains the result of CD1, CD2 and CD3
After ripping CD100, the logfile contains the result of CD1 up to CD100.
It seems that my logfile contains all ripps since the first cd i have ripped.

[Spoon]

Re: Logfile

It goes to D:\Music\dbpoweramp\Dru Hill\Tell Me (CDS-EU)\Log.txt

If it is a later disc, that has not even been inserted, where would it get the name from?

[jamstyle]

Re: Logfile

I'm sorry but i don't understand your question :(

[jamstyle]

Re: Logfile

It's crazy.

I create a new profile and now it works ...