right clicking in Windows Explorer; doesn't work

[dyet]

Hi

Not sure if this is a setting thing.

When I right click I get the "Convert" and "Edit Tag" in the Windows Explorer menu...i then select the menu and nothing work activates.

I did do the following..from another thread but with no luck
http://forum.dbpoweramp.com/showthread.php?t=10100

I rebooted after that...

Here are my settings from the config menu.....

Version Information
dBpowerAMP Music Converter: Release 10 Beta 3
Power Pack & Mp3 License: [ Registered: Yes ]
dBpowerAMP Audio Player: Not Installed 'music Player like no other'
dBpowerAMP CD Writer: Release 1.1 [ Unregistered Trial ]
Sveta Portable Audio: Not Installed 'enhance your portable player'

Contact Information
Web Site: http://www.dbpoweramp.com
Support: http://www.dbpoweramp.com/support.htm
Support Forum: http://forum.dbpoweramp.com
Codec Central: http://www.dbpoweramp.com/codec-central.htm
Add extra [en/de]coding abilities such as m4a, wma, etc.

Smart Install Codecs
Ogg Vorbis: .ogg
Musepack: .mpc
Mp4 (AAC): .mp4
Monkeys Audio: .ape
OptimFROG: .ofr
WavPack: .wv
Advanced Audio Compression: .aac


===Shell Integration===
Convert To (right click): On
Edit Tag (right click): On
Popup information Tips: On
Explorer ID Tag Property Page: On
Explorer Columns: On


===Codecs===
Installed Compression Codecs (Write)
[Arrange Music]
[Tag from Filename]: Release 1
Audio cd
FLAC: Release 5 (using FLAC 1.1.1) [ .flac ]
Mp3 (Lame): Lame Version 3.92 [ .mp3 ]
Ogg Vorbis aoTuV b4 SSE2: Ogg V1.1.1 (lancer20050709) [ .ogg ]
Shorten (CLI): Release 3 (Shorten 3.5.1) [ .shn ]
Test Conversion (No Write)
Wave: [ .wav ]
Windows Media Audio V9.1: Release 1 [ .wma ]
Windows Media Audio V9: Release 1.3b [ .wma ]


Installed Input Codecs (Read)
Auxiliary Input Decoder: .aux
CD Input Decoder: .cda
Flac Input Decoder: .flac; .fla
Mp3 Input Decoder: .mp3; .mp2; .mpga; .mpa; .mpx; .mpg; .mp1
Shorten Compressed Audio File (*.SHN): .SHN
Wave Input Decoder: .wav
Windows Media Audio Input Decoder: .wma; .asf; .wmv


===Options===
dBpowerAMP Reference Options
Pro. Frequency Conversion: On (slower but high quality)

Mp3 Input Decoder
CRC Errors: Ignore
Decode To: 16 bit (dithered)

Wave Compression Codec
More than 16 bit or 2 Channels: Write WaveFormatEx Header



===ID Tag Options===
Flac
Tag Creation: Vorbis Comments
Write ID3v1 Version: v1.1
Write ID3v2 Version: v2.3

Mp3
Tag Creation: ID3v2 & ID3v1
Write ID3v1 Version: v1.1
ID3v1 UTF8 Read: Yes
ID3v1 UTF8 Write: No
Write ID3v2 Unicode: No
Write ID3v2 Version: v2.3

Windows Media Audio
Write Track Number as: WM/TrackNumber

[ChristinaS]

You're a few versions behind with the converter as you're still using dBpowerAMP Music Converter: Release 10 Beta 3.

We are now at release 11.5 and a new one is just aroudn the corner.

Especially since yorus is already registered, you should update the converter. Download the latest version from http://www.dbpoweramp.com/dmc.htm . Install it on top of what you already have, without uninstalling first, to preserve registered status.

Make sure you are signed in as admin when you install and that you install to the same locaiton wehre you installed before. You also need to be an admin (or with admin priviledges) to run the programs.

[dyet]

I installed 11.5 and rebooted

but still no luck with right clicking...here is the settings

Version Information
dBpowerAMP Music Converter: Release 11.5
Power Pack & Mp3 License: [ Registered: Yes ]
dBpowerAMP Audio Player: Not Installed 'music Player like no other'
dBpowerAMP CD Writer: Release 1.1 [ Unregistered Trial ]
Sveta Portable Audio: Not Installed 'enhance your portable player'

Contact Information
Web Site: http://www.dbpoweramp.com
Support: http://www.dbpoweramp.com/support.htm
Support Forum: http://forum.dbpoweramp.com
Codec Central: http://www.dbpoweramp.com/codec-central.htm
Add extra [en/de]coding abilities such as m4a, wma, etc.

Smart Install Codecs
Ogg Vorbis: .ogg
Musepack: .mpc
Mp4 (AAC): .mp4
Monkeys Audio: .ape
OptimFROG: .ofr
WavPack: .wv
Advanced Audio Compression: .aac


===Shell Integration===
Convert To (right click): On
Edit Tag (right click): On
Popup information Tips: On
Explorer ID Tag Property Page: On
Explorer Columns: On


===Codecs===
Installed Compression Codecs (Write)
[Arrange Music]
[Tag from Filename]: Release 1
Audio cd
FLAC: Release 5 (using FLAC 1.1.1) [ .flac ]
Mp3 (Lame): Lame Version 3.96.1 [ .mp3 ]
Ogg Vorbis aoTuV b4 SSE2: Ogg V1.1.1 (lancer20050709) [ .ogg ]
Shorten (CLI): Release 3 (Shorten 3.5.1) [ .shn ]
Test Conversion (No Write)
Wave: [ .wav ]
Windows Media Audio V9.1: Release 1 [ .wma ]
Windows Media Audio V9: Release 1.3b [ .wma ]


Installed Input Codecs (Read)
Auxiliary Input Decoder: .aux
CD Input Decoder: .cda
Flac Input Decoder: .flac; .fla
Mp3 Input Decoder: .mp3; .mp2; .mpga; .mpa; .mpx; .mpg; .mp1
Shorten Compressed Audio File (*.SHN): .SHN
Wave Input Decoder: .wav
Windows Media Audio Input Decoder: .wma; .asf; .wmv


===Options===
dBpowerAMP Reference Options
Pro. Frequency Conversion: On (slower but high quality)

Mp3 Input Decoder
CRC Errors: Ignore
Decode To: 16 bit (dithered)

Wave Compression Codec
More than 16 bit or 2 Channels: Write WaveFormatEx Header



===ID Tag Options===
Flac
Tag Creation: Vorbis Comments
Write ID3v1 Version: v1.1
Write ID3v2 Version: v2.3

Mp3
Tag Creation: ID3v2 & ID3v1
Write ID3v1 Version: v1.1
ID3v1 UTF8 Read: Yes
ID3v1 UTF8 Write: No
Write ID3v2 Unicode: No
Write ID3v2 Version: v2.3

Windows Media Audio
Write Track Number as: WM/TrackNumber

[ChristinaS]

You got anything installed such as Windows Blinds or some other strange application?

Or are you running 64-bit Windows?

[dyet]

Thanks again!

Shell Toys was the culprit....blew that away and it works fine now.

Here is a link to my right Click Menu's

Before (http://www.flickr.com/photos/77585224@N00/112839086/)

After - that's more like it! (http://www.flickr.com/photos/77585224@N00/112841483/)

:smile2:

[ChristinaS]

Aha! Glad it's sorted now. Phew! :D