title
Products            Buy            Support Forum            Professional            About            Codec Central
 
Results 1 to 3 of 3

Thread: c2 - Re-Rip frame setting

  1. #1

    Join Date
    May 2010
    Posts
    2

    c2 - Re-Rip frame setting

    Great product!

    Configuring the dBpoweramp CD Ripper, I have tried to activate the c2 support. Trying with a painted CD as defined the guidance my computer confirmed my CD drive supports c2, but when ripping I then get errors because it has to rerip a quantity of frames exceeding 100. Now it is clear I can just increase the value, and setting it to 500 it then works fine, but my question is whether it then would be better just to leave out the c2 check?

    I donít believe the original cd drive in my computer is a good quality so another option is to buy a better one.


    dBpoweramp Release 13.5 Digital Audio Extraction Log from 29. maj 2010 5:34

    Drive & Settings
    ----------------

    Ripping with drive 'E: [HL-DT-ST - DVD-RAM GH15L ]', Drive offset: 667, Overread Lead-in/out: No
    AccurateRip: Active, Using C2: Yes, Cache: 39 KB, FUA Cache Invalidate: No
    Pass 1 Drive Speed: Max, Pass 2 Drive Speed: Max
    Ultra:: Vary Drive Speed: No, Min Passes: 1, Max Passes: 2, Finish After Clean Passes: 1
    Bad Sector Re-rip:: Drive Speed: Max, Maximum Re-reads: 60

    Encoder: FLAC -compression-level-5
    DSP Effects / Actions: -dspeffect1="ReplayGain=-albummode={qt}0{qt}" -dspeffect2="Audio CD - Hidden Track Silence Removal= -dbsilence={qt}-45{qt} -window={qt}4000{qt}"

    Extraction Log
    --------------

    Track 1: Ripped LBA 0 to 22840 (5:04) in 0:32. Filename: C:\Users\Moll\Music\Billy Joel\Songs in the Attic\Billy Joel - 01 - Miami 2017 (Seen the Lights Go out on Broadway).flac
    Insecure [Pass 1, Ultra 1 to 1, Re-Rip 163 Frames]
    Insecure [Pass 1, Ultra 1 to 1, Re-Rip 163 Frames]
    ** Aborted: Have to ReRip 163 Frames, Re-Rip Limit Set to 100 Frames

  2. #2
    Administrator
    Join Date
    Apr 2002
    Posts
    40,396

    Re: c2 - Re-Rip frame setting

    No, the abort option is nothing to do with c2, just there to speed up ripping (as normally if there are 163 bad frames, you are not going to get a secure rip).

  3. #3

    Join Date
    May 2010
    Posts
    2

    Re: c2 - Re-Rip frame setting

    Okay, thanks.

    Replacing the original HP drive with an new PLEXTOR drive has solved the problem. I have now ripped 20 CDís without any failures.

    dBpoweramp Release 13.5 Digital Audio Extraction Log from 5. juni 2010 6:13

    Drive & Settings
    ----------------

    Ripping with drive 'E: [PLEXTOR - DVDR PX-880SA ]', Drive offset: 6, Overread Lead-in/out: No
    AccurateRip: Active, Using C2: Yes, Cache: None, FUA Cache Invalidate: No
    Pass 1 Drive Speed: Max, Pass 2 Drive Speed: Max
    Ultra:: Vary Drive Speed: No, Min Passes: 1, Max Passes: 2, Finish After Clean Passes: 1
    Bad Sector Re-rip:: Drive Speed: Max, Maximum Re-reads: 60

    Encoder: FLAC -compression-level-5
    DSP Effects / Actions: -dspeffect1="ReplayGain=-albummode={qt}0{qt}" -dspeffect2="Audio CD - Hidden Track Silence Removal= -dbsilence={qt}-45{qt} -window={qt}4000{qt}"

    Extraction Log
    --------------

    Track 1: Ripped LBA 0 to 18622 (4:08) in 0:35. Filename: C:\Users\Moll\Music\Bruce Springsteen\The Rising\Bruce Springsteen - 01 - Lonesome Day.flac
    AccurateRip: Accurate (confidence 4) [Pass 1]
    CRC32: 6F4DFA60 AccurateRip CRC: 208C3C18 [DiscID: 015-0026a157-01b9f7fb-ce11190f-1]

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •