Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

[Staxxx]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

The Test Conversion is still going on. There is one file as yet identified. This is just one of the many folders with music on the NAS. It will take me a couple of weeks to get through them all. Will send you the files when done. Thank you.

[Spoon]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

If you can isolate the file causing the issue, we would like to have it.

[Staxxx]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

OK. I re-ran it and it did not get past the "Examining Source and Overwrite Check".....
Maybe I can scan them in smaller batches to overcome this.

In the meanwhile, the scanning with uPnP has reached 48,000 (all the while the error pop-up message has been occurring and each minute I have been clicking "close the program").

OK got past the Examining Source and Overwrite Check by selecting just one folder of music by one composer (Bach). There are four CPUs working on the Test Conversion. It will take 1 day and 15 hours so it will be a while before I get back on this....

[Staxxx]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

Yes it stopped working somewhere .....did not say why...I will rerun the Test Conversion and see the details of the error message.

One thing I noticed that although I get the UMediaLibrary-ReadTags has stopped working pop-up every minute or so, the program is continuing to scan this time...it is up to 41,000 files, although I cannot see/access these files through Windows Media/UPnP.

According to DBPower amp there are 49,398 files to check conversion.

[Staxxx]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

OK. Will do so. Thank you.

[mville]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

I have had DBpoweramp on this machine for over a year. I use it very often and without any problems. I have a lot of music that I have converted from various formats (WAV, FLAC, APE, ALAC etc.) to WAV64 without any problems ever.

To determine whether you have any file corruption since converting, as Spoon suggested, run Batch Converter >> Test Conversion on your audio library.

[Staxxx]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

I have had DBpoweramp on this machine for over a year. I use it very often and without any problems. I have a lot of music that I have converted from various formats (WAV, FLAC, APE, ALAC etc.) to WAV64 without any problems ever.

[Spoon]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

Install dBpoweramp on this machine, use Batch Converter and select your music folder. Then click Convert >> change the encoder to Test Conversion and let it run through all the files. Does it crash also?

[Staxxx]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

OK. I did notice one thing. In the last few attempts are restarting Asset and Refresh All, the program stalls at 28,500 tracks each time. Once or twice it has gone past to about 48,000 yesterday but today it is pretty much stalling at 28.5k each time. Here is the problem signature I get every time:
Problem signature:
Problem Event Name: APPCRASH
Application Name: uMediaLibrary-ReadTags.exe
Application Version: 4.2.0.4
Application Timestamp: 54d8d9c9
Fault Module Name: uMediaLibrary-ReadTags.exe
Fault Module Version: 4.2.0.4
Fault Module Timestamp: 54d8d9c9
Exception Code: 40000015
Exception Offset: 00006f32
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 16393
Additional Information 1: ee2a
Additional Information 2: ee2a04e1273eb72313d00884a3408758
Additional Information 3: 43d1
Additional Information 4: 43d12f246557403be4f5c54ffe7030d1

[Staxxx]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

Unfortunately this is the only PC that I own and my work laptop cannot be used.

[Spoon]

Re: Asset uPnP crashes during scanning - uMediaLibrary-ReadTags has stopped working

Are you able to test it on a different PC (but looking at the same files)?

[Staxxx]

Hello. I just bought the Premium version of uPnP and have started a scan of my library.
At some point through the scan I get a pop-up window as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: uMediaLibrary-ReadTags.exe
Application Version: 4.2.0.4
Application Timestamp: 54d8d9c9
Fault Module Name: uMediaLibrary-ReadTags.exe
Fault Module Version: 4.2.0.4
Fault Module Timestamp: 54d8d9c9
Exception Code: 40000015
Exception Offset: 00006f32
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 16393
Additional Information 1: ee2a
Additional Information 2: ee2a04e1273eb72313d00884a3408758
Additional Information 3: 43d1
Additional Information 4: 43d12f246557403be4f5c54ffe7030d1

The first time this happened after 21000 tracks. I started a rescan using refresh all and this time it happened after 45000 tracks.
The pop-up continues to appear every few seconds or so and will probably do so indefinitely, although I have clicked the close the program option each time. It does not continue scanning and if I try detecting changes it does not seem to do anything. I then tried using the Restart Asset button and then Detecting Changes and this time the error message appeared after 28000 files. And continues to do so every several seconds. It seems to be appearing at different points in the scanning even if the files were successfully scanned previously each time I repeat this latter process.

I am using a PC and connected to a Netgear NAS. The files are located on the NAS and also on an internal HDD.


2. I am using Windows Media Player as the renderer and when I select Asset uPnP under the Network map only 1800 files show up or the 48000 or so in the Library. How do I access all the files scanned to date please?

3. Annoyingly the UMediaLibrary-ReadTags has stopped working pop-up window continues to pop up every few seconds even when I close the program. How do I disable it until I know how to remedy the situation please?

Thank you