Asset Upnp for Synology?

[hecaitomex]

Re: Asset Upnp for Synology?

hey!
have u tried it melgoth?
im sad that asset upnp is not available for synology now, although community waiting for it is growing, nevertheless i ordered a ds216+ as my new nas wich has a intel celeron 64bit cpu, and i would like to ask what you guys think, wheter the debian intel 64bit manual installer might be working on this ship?
appreciate any recommendations of you pros, as my knowledge is limited to follow instructions above, but not much more.
thanks
H

[melgoth]

Re: Asset Upnp for Synology?

ok thanks will try it

[PeterP]

Re: Asset Upnp for Synology?

On Intel Atom, Linux x86 32-bit build would be the first thing to try.

When in doubt, try uploading each of them to the NAS, unpacking and starting up the main program manually over SSH to see if it runs or not.

[melgoth]

Re: Asset Upnp for Synology?

Hi!

I'm still looking for a version for my NAS DS2411+ with Intel Atom D525. I would try to install it manually, based on the guide above, but I need the right build! I couldn't do it by my own. Is there a chance to get it?

[Spleen]

Re: Asset Upnp for Synology?

Ok, thanks. That's well beyond my ability so I guess I'll have to chalk it up and move on.

[PeterP]

Re: Asset Upnp for Synology?

Asset is not officially supported for Synology devices. We do not provide a proper installer and currently do not plan on making one.

However, we put a lot of effort into making the generic Linux version of Asset as compatible as possible; as you can see from this thread, you can get it running as a generic Linux program on Linux powered NAS units.

[Spleen]

Re: Asset Upnp for Synology?

I'm guessing that Asset is still not available for Synology? Having just bought both I'm rather hoping that it is..

[Wilts_RM]

Re: Asset Upnp for Synology?

Hi,
Good news for owners of a Synology NAS DS214SE or eq. (same ARM7 core)
You can run Asset for Raspberry Pi on it.

Installation instructions for ASSET on Synology DS214SE

Enable the SSH-service (using port 10022) on the Synology NAS via the diskstation manager under control panel>Terminal and SNMP options

On a windows pc:
Launch "Putty.exe" and open a PuTTy session:
Host Name: diskstation (or IP address of synology NAS)
Port: 10022
Connection type: SSH

login as: root
root@diskstation's password: ********** (enter here Synology's admin password)

cd /usr/bin
mkdir asset
chmod 777 asset
cd asset

wget http://www.dbpoweramp.com/install/As...berryPi.tar.gz

tar -zxvf *.gz
rm *.gz

cd /usr/bin/asset/bin
./AssetUPnP


Close PuTTy

Configure Asset with a web browser and the URL http://diskstation:45537


To autostart Asset, make an 'asset.conf' script file with 'Notepad'
Content of the 'asset.conf' file:
start on started synonetd
stop on runlevel [06]
exec /usr/bin/asset/bin/AssetUPnP


Copy the asset.conf script file from your pc to the /etc/init folder on your NAS.
To do that? download 'WinSCP', install WinSCP and launch WinSCP
Login with:
File protocol: SFTP
Address Host: diskstation (or IP address of synology NAS)
Port: 10022
user name: root
password: ********** (enter here Synology's admin password)

Browse on the left window to the 'asset.conf' file
Browse on the right window to the path: /etc/init
Copy the 'asset.conf' file to the /etc/init folder
Close WinSCP

Reboot the Synology NAS

Enjoy

Hi,

Thanks so much for posting this; that's fantastic! I've followed the steps, and I've been able to get Asset UPnP working on my Synology NAS, so I'm really pleased.

The only trouble I'm having with it is getting it start up automatically. I couldn't S/FTP in to the root account, and a search online suggested that this is a common problem with DSM.

I therefore used Vi to create the file in the relevant directory, but when I restarted the NAS, Asset wasn't running.

Is there anything else I can try? If I could get it to start up with the NAS, that would be perfect.

Many thanks in anticipation.

Best wishes,

Wilts_RM

[melgoth]

Re: Asset Upnp for Synology?

I've just bought a 215j - and the instruction to install ASSET (the RaspberryPi version 4.6) worked perfectly. Everything seems to work.

Martin

Yes you have a supported NAS (CPU). In the meantime I figured out that my NAS is based on another CPU

http://forum.synology.com/enu/viewtopic.php?f=26&t=107921&p=406074*p406074

The boxes use different processors (Intel Atom D525 vs ARMv71), so you'd have to find a binary built for your CPU.

so I have the bad card :-(

melgoth

[MartinGr]

Re: Asset Upnp for Synology?

Yes very interesting for me too!
Please post your experience!

I don't know why ASSET isn't official supported for Synology Nas. I'm using DS2411+.
It would be very appreciate if this works that an official version with support will be released!!

thx
melgoth

I've just bought a 215j - and the instruction to install ASSET (the RaspberryPi version 4.6) worked perfectly. Everything seems to work.

Martin

[melgoth]

Re: Asset Upnp for Synology?

Hello all,
do you have any experience with the solution since that last entry from"Oldrocker"?
I´m using ASSET on my PC and will migrate to my NAS DS213j. I have arounf 500CD´s.

cheers

Yes very interesting for me too!
Please post your experience!

I don't know why ASSET isn't official supported for Synology Nas. I'm using DS2411+.
It would be very appreciate if this works that an official version with support will be released!!

thx
melgoth

[gegges11]

Re: Asset Upnp for Synology?

Hello all,
do you have any experience with the solution since that last entry from"Oldrocker"?
I´m using ASSET on my PC and will migrate to my NAS DS213j. I have arounf 500CD´s.

cheers

[OldRocker]

Re: Asset Upnp for Synology?

Hi,
Good news for owners of a Synology NAS DS214SE or eq. (same ARM7 core)
You can run Asset for Raspberry Pi on it.

Installation instructions for ASSET on Synology DS214SE

Enable the SSH-service (using port 10022) on the Synology NAS via the diskstation manager under control panel>Terminal and SNMP options

On a windows pc:
Launch "Putty.exe" and open a PuTTy session:
Host Name: diskstation (or IP address of synology NAS)
Port: 10022
Connection type: SSH

login as: root
root@diskstation's password: ********** (enter here Synology's admin password)

cd /usr/bin
mkdir asset
chmod 777 asset
cd asset

wget http://www.dbpoweramp.com/install/As...berryPi.tar.gz

tar -zxvf *.gz
rm *.gz

cd /usr/bin/asset/bin
./AssetUPnP


Close PuTTy

Configure Asset with a web browser and the URL http://diskstation:45537


To autostart Asset, make an 'asset.conf' script file with 'Notepad'
Content of the 'asset.conf' file:
start on started synonetd
stop on runlevel [06]
exec /usr/bin/asset/bin/AssetUPnP


Copy the asset.conf script file from your pc to the /etc/init folder on your NAS.
To do that? download 'WinSCP', install WinSCP and launch WinSCP
Login with:
File protocol: SFTP
Address Host: diskstation (or IP address of synology NAS)
Port: 10022
user name: root
password: ********** (enter here Synology's admin password)

Browse on the left window to the 'asset.conf' file
Browse on the right window to the path: /etc/init
Copy the 'asset.conf' file to the /etc/init folder
Close WinSCP

Reboot the Synology NAS

Enjoy

[Duncan]

Re: Asset Upnp for Synology?

hi, just count me too for being very interested in asset for SYNOLOGY

kind regards
duncan

[jonesthegas]

Re: Asset Upnp for Synology?

Me too. Synology sell a lot of NAS devices so I am not sure why there would be no demand.

Regards

Martin