Play/Pause not working with Denon AVR4311

[Helheimr]

Re: Play/Pause not working with Denon AVR4311

Somewhat off topic, but since you guys are discussing FLAC file playback with the Denon AVR4311, I have a related question that you can probably answer: Does the Denon display album art from the FLAC files via its video output? In other words, can you see the artwork on the TV?

yes, sure, it will display album artwork - although there seems to be a limit to 300x300 pixels

[fix]

Re: Play/Pause not working with Denon AVR4311

I have upgraded the Marantz NA7004 with the Airplay firmware and after that the pause command has worked correctly ..

Note: Even with the latest standard firmware (2nd upgrade since the original firmware) the pause was not worked so the Airplay firmware seems to be much better tested.

[IrishPub]

Re: Play/Pause not working with Denon AVR4311

Somewhat off topic, but since you guys are discussing FLAC file playback with the Denon AVR4311, I have a related question that you can probably answer: Does the Denon display album art from the FLAC files via its video output? In other words, can you see the artwork on the TV?

[Helheimr]

Re: Play/Pause not working with Denon AVR4311

Good to hear you will check it out Spoon! No deal killer for me - I rarely pause anyway (only when the phone rings...)

[fix]

Re: Play/Pause not working with Denon AVR4311

I have the same problem with my Marantz NA7004. "Pause" command is not working with Asset UPnP - XP Release 3.

[Spoon-]

Re: Play/Pause not working with Denon AVR4311

Difficult to say, we are writing R14.1 (music Converter) right now, when that is done Asset 3.1 will be done.

[Brett]

Re: Play/Pause not working with Denon AVR4311

I have a avr3311 so will have a play when work resumes on asset v3.1

I currently have an Olive 4, but I'm thinking of selling it and using a program like Asset to stream files from one of the PCs on my network to my Denon, and replacing the Olive 4 with perhaps a Cambridge Audio NP30 to stream to my high(er) end system in another part of the house.

I really prefer Asset over Twonky, but not being able to pause is a bit of a deal killer for me since I use my Denon to stream quite often. Any rough estimate as to when work on Asset will resume?

Thanks

[Spoon-]

Re: Play/Pause not working with Denon AVR4311

I have a avr3311 so will have a play when work resumes on asset v3.1

[Helheimr]

Re: Play/Pause not working with Denon AVR4311

I finally got something back from Denon. Basically they say it should work, and with Tversity it does (and apparently also Twonky and Olive 4)...At Denon they had no technical details/knowledge on any particular part of the DLNA stuff, not very surprising I guess...So, not much help there.

[Brett]

Re: Play/Pause not working with Denon AVR4311

Not that this is much help, but I can confirm that this is also an issue streaming files via Asset v3 to a Denon AVR-3808CI. Play Pause works with Twonky and whatever server the Olive 4 HD uses.

[Helheimr]

Re: Play/Pause not working with Denon AVR4311

OK - sure, I will give it a shot, but my bet is they'll not be as responsive as you!

[Spoon-]

Re: Play/Pause not working with Denon AVR4311

Can you ask Denon?

[Helheimr]

Re: Play/Pause not working with Denon AVR4311

I have checked out the settings on Tversity.

My FLAC folder I have set as "Never transcode". On the Denon it is also clear that it is decoding FLAC files. What audio "type" however is not clear. Therefore I have tried to add the FLAC support of the Denon in the device profile of the Denon (supported mime-type).

When specifying audio/flac the Denon refuses to play FLAC files. However, when specifying audio/x-flac it plays them nicely again.

But, now, the curious thing! With the x-flac setting the Denon does also NOT pause/play files from Tversity! (Same as Asset). But with the the "Never transcode" setting it does.....

well, I'm confused, hope it means more to someone else?

[Spoon-]

Re: Play/Pause not working with Denon AVR4311

The Denon would not send a pause command, as files are served as a HTTP GET, so the denon simply stops requesting data for a while.

In TVersity you would need to know the exact audio type it supplies for FLAC to the denon.

[Helheimr]

Re: Play/Pause not working with Denon AVR4311

Thanks for you quick reply.

I'm not sure if this is what you need, but from the log file is found this:

===========ProcessFileRequest================
/content/c2/b16/f44100/d25-co11.flac
=============================================

Content Range: -1 to -1

Serving File as is: d:\Shares\Music\FLAC\2 Unlimited - Hits Unlimited\(01)-Do What's Good For Me-2 Unlimited-1995.flac

Serve Entity Set to: audio/x-flac

===========ProcessFileRequest================
/aa/21157203/cover.jpg
=============================================

Also from the Denon GUI it tells me it is playing a FLAC file (not PCM).

Also note that I'm not trying to "seek" in the file, just pause the playback and then resume again.

I have also tried to force the FLAC files to LPCM but that does not change the behavior.

It seem that when the Denon sends the "pause command" Asset just keeps on streaming, whereas Tversity seems to pick it up OK. Could I glean anything useful from the Tversity settings? I know in Tveristy the Denon is treated as an "SLA 5500/20" device.(?)