Products            Buy            Support Forum            Professional            About            Codec Central
Results 1 to 15 of 24

Thread: Path and Naming questions

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Path and Naming questions

    Geetings to everyone! I sent Mr. Spoon a question and was directed to the forums for help. I will always take the long way around the barn so please forgive my lack of brevity? I got dbpoweramp and an Acronova dupliQ working and was able to rip 170+ CDs(2196 Tracks, flac) in a little over 10 hours. I did it in one long batch and paused several times when I was away from the are! I then converted the flac files to mp3(lame) in another folder. I am impressed and thrilled! I have been able to get some of my music to my and my wife's portable players and am listening to music. I consider this first ripping session an experiment and learned some things that I want to change before I start my real rip right rip once undertaking. My collection is virtually all "classical" and I will have dozens of such sessions before I get all of the music archived to flac. My wife has a much smaller collection of modern music and I am sure that as I get the ripping and naming of my music figured out I will be able to get her music archived as well. In the first ripping session I was just thrilled that the dbpoweramp software and the robot worked flawlessly after a few hiccups at the beginning of the run. The standard path and naming structureswere left in place for this first run. I relized that the file names and paths are less than optimal for my puproses. Let me make clear that dbpa did exactly as it was told and performed beyond my expectation and this post is in NO WAY meant voice my displeasure with it! Windows 7 will not allow file names beyond a certain length to be moved or worked on in other ways. I know that I could spend the time with software to manipulate the current flac files I have but in reality these represent less than 5% of the total files I will have to rip and convert so I feel that starting at the beginning is how I will proceed. Since the first experimental ripping session I have tried to change parameters within the program and do further testing. I tried to look on these forums for answers to my question but have had no luck. I attribute this to my ignorance and nothing else! MY ignorance did lead me to choose my username. I have health issues that make time more important to me than in years past so I am forced to asking for help. The smartest most efficient thing I can do is ask the experts.In his responce to me Mr. Spoon suggested posting to the forum and that help would be forthcoming and without cost. I realize that people's time is valuable and although I am ignorant I do not wish to free load! If I were to pay a service to rip and archive my music it would cost money.I am willing to pay someone to help me get the answers I need, I could send money via paypal. I will actually take great pleasure in ripping, archiving and cataloging my own music. Im getting to the point I promise! My inability to correctly tell the program(s) what to do applies both the batch ripper and cd ripper. I have a large number of box sets and I want these to be ripped to a root folder on the C(main) drive or an external drive(?). Then to a subfolder like Beethoven. I want the box sets to be named so they stay grouped by disk number ie, Disk 1 of 157. The name of a track on a classical cd can be liteally 100 characters long so using the track title as an identifier in the file name is not ideal. again I have had no luck figuring out how to tell the sofware what to do. I am certain dbpa has the capability to do what I want? I hope someone can help me but please realize that my understanding of the intricies of dbpa is many factors of magnitude less than most of you. There are many things that I don't know like should I run each "box set" as a seperate batch etc. I probably have not been specific enough in the explaning what I want to accomplish? If anyone wishes to take the time to help me, as a paid "tutor" thru pm correspondance or other wise, please let me know! Do to reasons beyond my control I may not respond rapidly, please dont take this as I lack thankfulness or interest. If you have read this far thanks for your time Captain Zero

  2. #2
    Join Date
    Apr 2002

    Re: Path and Naming questions

    So you are after:

    artist\album\disk x of x\track number - track title (but shortened less than 100)

  3. #3

    Re: Path and Naming questions

    Hello and thank you for responding! I will try to explain what I wish to accomplish? I am unsure of terminology. I I have created a root folder on the C: drive of the pc at the same level as My Music, My documents etc.. The folder is called AA Flac Archive. The first layer of subfolders below this will be structured by Composer. I grabed a box set called Liszt The Collection. So I want to rip this collection of 34 CDs to AA Flac Archive\Liszt\Liszt The Collection. Virtually all of these box sets have various artists playing the pieces, so depending on how the engineers decide to assemble the metatadata? this may effect the naming. I want to keep the ripped flac files as shallow within the folder level structure a possible because it seems that Windows see the folders and subfolders as part of the file name and the deeper the folder structure the longer the file name? I took a screen shot of the dbpa cd ripper with the first disk read but dont know how to insert it into this post? I am working with dbpa CD Ripper at this point as it would seem the answers would apply equally to CD Ripper and Batch Ripper?

    So in this example I would like to rip this box set to the AA Flac Archive\Liszt\Liszt The Collection folder\album&Disk* ( Would I need to create the folders to this level before starting a CD or Batch Ripping session)
    I would like the file naming to be album\composer\track title\track number - track number\disk x of xxx
    I would like to limit the track title to 60 characters or less at this point but if this is a vairaible that can be changed I would like to understand how to do this as I might discover that this may create a name that windows thinks is too long.
    Should I run each box set a single batch when running the batch ripper? I don't necessarily think that because all of the CDs are in a box set that they are some how associated with each other through metadata that indicates each CD as part of the box set title and disk x of xxx ie. Liszt The Collection, Disk x of xxx. This data may only be on the physical box, insert or sleeve.
    In the lower left of the dbpa CD Ripper screen it say path with music as the selection, with 4 options- music, public music, video, public video when clicking the "set" option. Can other paths be chosen like an external drive or the AA Flac Archive folder I created.
    Thanks again for looking at this, I know that dbpa can do what I am wanting! It remains to be seen if I will gain the ability to direct it correct it?

  4. #4
    Join Date
    Apr 2002

    Re: Path and Naming questions

    album\composer\track title\track number - track number\disk x of xxx

    does not make sense, in that each track would be split in to different folders, normally tracks for an album are grouped together in the same folder.

  5. #5
    dBpoweramp Guru
    Join Date
    Nov 2007
    Florida, USA

    Re: Path and Naming questions

    Quote Originally Posted by Spoon View Post
    album\composer\track title\track number - track number\disk x of xxx

    does not make sense, in that each track would be split in to different folders, normally tracks for an album are grouped together in the same folder.
    seems like one would want:

    album\composer\disk x of xxx\track number - track title


    composer\album\disk x of xxx\track number - track title

  6. #6

    Re: Path and Naming questions

    Hello thanks for responding. I am not always able to be on the pc so my responses will be delayed by a couple of days. I made a typing error in my previous post. Yes I want each track of a CD to be in a folder represented by the CD
    Here is what I think I meant to type album\composer\track title-track number\disk x of xxx and limit the track title name to <60. In my experimental runs I get the tracks in multi levels of folders. For example I would like to have the affore mention Liszt box set in the AA Flac Archive folder in the Liszt subfoler in the Liszt The Collection subfolder then each of the 34 discs be in a sub folder. I have a limited ability to express what I want correctly, as I am simply ignorant! I can't seem to understand which part of the the naming structure/string the program looks to make folders, subfolders and file names. I have no idea on how I can tell the CD Ripper or Batch Ripper that I am going to ripping a 34 CD box set and to rip the next 34 disks to the following place(s)

    AA Flac File(folder)
    Liszt The Collection(Folder)
    CD 1 (Folder)-
    Track 1
    Track 2
    Track 8
    Cd 2 (Folder)
    and so on
    Nor do I know if I have to creat any of the folders and/or subfolders priorto ripping. The only place I have been able to rip to is the My Music folder. I have yet to get a single CD to go where and how I want it.

    Below is how the CD is structured CD 1(Which is CD
    "Concerto for Piano and Orchestra No. 1 in E Flat Major
    1. Allegro maestoso . Tempo giusto
    2. Quasi Adago .................
    3. Allegro marziale ............
    "Concerto for Piano and Orchestra No. 2 in A Flat Major
    4. ................................
    5. ...............................
    6. ................................
    7. .................................
    8. Adante - Cadenza. Presto .................
    Zierman- Piano
    Boston symphony Orchestra
    S. Ozawa -Conductor
    CD 2
    I am not trying to be problematic and I certainly don't wish to cause anyone frustration in asking these questions or by my responses! When I read your response post(s) I have no idea if that is what I want or not because I don't know what the results of the naming does. If you can see what I want to accomplish based on what I have said I will gladly and apprreciatively try it. Maybe there is more infromation in the metedata of each CD and track than I can see and folders, subfolders and files are being created using this data? Please understand that I am not making dbpa the issue, it is my ability or lack there of that is at issue! I don't think that my thought process for organizing the ripped music is unusual or illogical?
    I have looked for books and material to try to educate myself about CDs, ripping, metadata etc., but I can't find anything that would help me. This is partly why I thought of offering to pay someone to help educate me. I would very much like accomplish the ripping of my music,how I want it, because I would feel good for the accomplishment and I don't wish to pay a ripping service the many thousands of dollars it would cost! But if I can't adequately express my thoughts I am probably wasting board space and peoples time. I wish I could be more clear! Thanks for your time Best Regards

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts