Music Converter converts But...File says 0 size

**Spoon** · 01-27-2011, 08:31 AM

Re: Music Converter converts But...File says 0 size

All mp3 files or only a few? Make sure you have no DSP effects, as a test let dbpoweramp create a mp3 file from a wave file, then convert back to wave to see if it works.

**MusicBug** · 01-27-2011, 02:22 PM

Re: Music Converter converts But...File says 0 size

NO.... It's all files. No matter what I do..It shows a file size of 0 :( Is there something I am missing from the install ? It's not showing all the Codecs. Very few to choose from. I paid $56 for this program. I sure hope you can help me .

**Spoon** · 01-27-2011, 04:02 PM

Re: Music Converter converts But...File says 0 size

Try the test as I requested, convert a wave file to mp3 with dBpoweramp, then back to wave (note this is just a test).

**MusicBug** · 01-27-2011, 08:18 PM

Re: Music Converter converts But...File says 0 size

I did that...Still not working. Does the same both ways. Missing some Dlls ...Maybe ? With another program I have... I had to place the Dlls in a folder called Sytem WOW. Can this be the problem ?:headbang:

**Spoon** · 01-27-2011, 09:49 PM

Re: Music Converter converts But...File says 0 size

Should not be as dBpoweramp is designed to work on 64 bit version of Windows 7.

The find out for sure what is happening, open dBpoweramp Configuration >> Music Converter and enable the Debug Option at the bottom of the page. Next do a conversion mp3 >> Wave and after the conversion Notepad will show the debug log. Copy and paste it to this forum thread please.

**MusicBug** · 01-27-2011, 10:04 PM

Re: Music Converter converts But...File says 0 size

Splitting Command Line:Done
->-> [dBCoreConverter::ReaddBCommandFile]
<-<- [dBCoreConverter::ReaddBCommandFile]
->-> [cldBCodecHandler::FindDecoder]
Checking Decoder 'C:\Program Files (x86)\Illustrate\dBpoweramp\decoder\mp3.dll' for extension '.mp3'
Decodes [clDecoder::Get]
<<< Match, using decoder
Using Registry Cached Decoder: C:\Program Files (x86)\Illustrate\dBpoweramp\decoder\mp3.dll
<-<- [cldBCodecHandler::FindDecoder]
BatchID [clDecoder::Set]
->-> [cldBCodecHandler::LoadEncoder]
Loading Encoder 'C:\Program Files (x86)\Illustrate\dBpoweramp\encoder\Wave.DLL'
<-<- [cldBCodecHandler::LoadEncoder]
BatchID [clEncoder::Set]
->-> [dBCoreConverter::StripCoreConverterCmds]
<-<- [dBCoreConverter::StripCoreConverterCmds]
SendRawUnCompressed [clEncoder::Get]
Communicate [clDecoder::Get]
Communicate [clEncoder::Get]
NeedHQAudio [clEncoder::Get]
->-> [clDecoder::Open]
Opening file '\\PHOTOMACHINE\SharedDocs\My Music\Amazon MP3\The Nitty Gritty Dirt Band\Certified Hits\01 - Mr. Bojangles (Digitally Remastered 01).mp3' for read access: Opened
->-> [clDecoder::ReadIDTags]
Reading Tag: APE contained 0 tags:
Reading Tag: ID3v2 contained 12 tags:
Composer: Jerry Jeff Walker
Title: Mr. Bojangles (Digitally Remastered 01)
Copyright: (C) 2001 Capitol Records Nashville
Genre: Pop
Artist: The Nitty Gritty Dirt Band
Album: Certified Hits
Comment: Amazon.com Song ID: 202034359
Track: 1/10
_albumart_1_Front Album Cover: DATA Length: 55047 ......JFIF.....`.`..
Album Artist: The Nitty Gritty Dirt Band
Disc: 1/1
Year: 2001
Reading Tag: ID3v1 contained 7 tags:
Title: Mr. Bojangles (Digitally Remas
Artist: The Nitty Gritty Dirt Band
Album: Certified Hits
Year: 2001
Comment: Amazon.com Song ID: 20203435
Genre: Pop
Track: 1
<-<- [clDecoder::ReadIDTags]
->-> [clsmpeg123::Init]
mpeg data stream begins at byte position: 55752
<-<- [clsmpeg123::Init]
->-> [clDecoder::FillAudioProps]
Audio Quality: Very High (Lossy)
Encoder: LAME 3.97
Encoder Settings: Variable Bit Rate -V 0 (Extreme)
Channel Mapping: Left, Right
Channel Coupling: Joint-Stereo (Mid Side)
Sample Count: 9,499,140
MPEG Version: MPEG 1 Layer III
MPEG Technical: Header: Lame [delay: 576 padding: 1980] Bits: Original
ID Tag: ID3v2.3 (UTF16) & ID3v1.1
Contains: Album Art, ID Tag [ID3v2.3 (UTF16) & ID3v1.1]
Gapless: Yes
<-<- [clDecoder::FillAudioProps]
->-> [clDecoder::FillAudioInfo]
Uncompressed WFX (sent to db): Format Tag: 1 Channels: 2 Bits per Sample: 16 Samples Per Second: 44100 Bytes Per Second: 176400 Block Align: 4 CB Size: 0
Audio Length: 215400 mili-seconds 6865097 bytes 254 kbps
<-<- [clDecoder::FillAudioInfo]
Creating Decode Buffer: Created
<-<- [clDecoder::Open]
SendOverReplayGainTags [clEncoder::Get]
->-> [clEncoder::BeginConversion]
Converting to '\\PHOTOMACHINE\SharedDocs\My Music\MY MIDI MUSIC\CONVERTED SONGS 2\01 - Mr. Bojangles (Digitally Remastered 01).wav' encoder settings ' -compression="ACM" -bits="16" -freq="16000" -channels="2" -acm="55000200112B0000B80B0000010000000C00010002000 0009C0001000000" -wavemp3="-b 160"'
Wave output WaveFormat: Format Tag: 85 Channels: 2 Bits per Sample: 0 Samples Per Second: 11025 Bytes Per Second: 3000 Block Align: 1 CB Size: 12
->-> [clRIFFHandler::InitializeNewWAV]
clRIFFHandler::CalcAllChunks: Ok
->-> Adding Chunk 'fmt ' Length: 30 [clRIFFHandler::AddChunk]
clRIFFHandler::CalcAllChunks: Ok
<-<- [clRIFFHandler::AddChunk]
->-> Adding Chunk 'fact' Length: 4 [clRIFFHandler::AddChunk]
clRIFFHandler::CalcAllChunks: Ok
<-<- [clRIFFHandler::AddChunk]
->-> Adding Chunk 'data' Length: 0 [clRIFFHandler::AddChunk]
clRIFFHandler::CalcAllChunks: Ok
<-<- [clRIFFHandler::AddChunk]
->-> [clRIFFHandler::WriteChunkHeaders]
clRIFFHandler::CalcAllChunks: Ok
Writing Chunk Header 'fmt ' Length: 30 ChunkPosition: 12 ChunkDataPos: 20
Writing Chunk Header 'fact' Length: 4 ChunkPosition: 50 ChunkDataPos: 58
Writing Chunk Header 'data' Length: 0 ChunkPosition: 62 ChunkDataPos: 70
<-<- Exit as only write to data chunk [clRIFFHandler::WriteChunkHeaders]
Writing Chunk Data 'fmt ' Length: 30 ChunkPosition: 12 ChunkDataPos: 20
Writing Chunk Data 'fact' Length: 4 ChunkPosition: 50 ChunkDataPos: 58
<-<- [clRIFFHandler::InitializeNewWAV]
<-<- [clEncoder::BeginConversion]
Communicate [clDecoder::Get]
Communicate [clEncoder::Get]
Encoding To: Wave
Encoder Cmd Line: -compression="ACM" -bits="16" -freq="16000" -channels="2" -acm="55000200112B0000B80B0000010000000C00010002000 0009C0001000000" -wavemp3="-b 160"
============= CONVERSION BEGIN =============
============= CONVERSION END =============
Communicate [clDecoder::Get]
Communicate [clEncoder::Get]
->-> [dBCoreConverter::CloseDecoder]
->-> [clDecoder::Close]
<-<- [clDecoder::Close]
->-> [clEncoder::EndConversion]
->-> [clRIFFHandler::WriteChunkHeaders]
clRIFFHandler::CalcAllChunks: Ok
Writing Chunk Header 'data' Length: 0 ChunkPosition: 62 ChunkDataPos: 70
<-<- [clRIFFHandler::WriteChunkHeaders]
Writing Chunk Data 'fact' Length: 4 ChunkPosition: 50 ChunkDataPos: 58
<-<- [clEncoder::EndConversion]
->-> [dBCoreConverter::IDTagWriter]
->-> [cldBCodecHandler::FindDecoder]
Checking Decoder 'C:\Program Files (x86)\Illustrate\dBpoweramp\decoder\Wave.dll' for extension '.wav'
Decodes [clDecoder::Get]
<<< Match, using decoder
Using Registry Cached Decoder: C:\Program Files (x86)\Illustrate\dBpoweramp\decoder\Wave.dll
<-<- [cldBCodecHandler::FindDecoder]
IDTags [clDecoder::Set]
->-> [clWaveDecoder::WriteIDTags]
->-> [clRIFFBEXTChunk::TagsToBEXT]
Encoding BEXT chunk [clRIFFBEXTChunk::TagsToBEXT]
<-<- [clRIFFBEXTChunk::TagsToBEXT]
Opening file '\\PHOTOMACHINE\SharedDocs\My Music\MY MIDI MUSIC\CONVERTED SONGS 2\01 - Mr. Bojangles (Digitally Remastered 01).wav' for write access: Opened
->-> [clRIFFHandler::Initialize]
clRIFFHandler::CalcAllChunks: Ok
<-<- [clRIFFHandler::Initialize]
->-> [clRIFFHandler::ScanFile]
clRIFFHandler::CalcAllChunks: Ok
RIFF Header 'RIFF' Length: 62 FormType 'WAVE'
Got Chunk 'fmt ' Length: 30 RiffSizeLeft: 50 ChunkPosition: 12
Got Chunk 'fact' Length: 4 RiffSizeLeft: 12 ChunkPosition: 50
Got Chunk 'data' Length: 0 RiffSizeLeft: 0 ChunkPosition: 62
clRIFFHandler::CalcAllChunks: Ok
<-<- [clRIFFHandler::ScanFile]
->-> [clRIFFLISTChunk::TagsToLIST]
<-<- [clRIFFLISTChunk::TagsToLIST]
clRIFFHandler::CalcAllChunks: Ok
->-> [clRIFFHandler::WriteChunkHeaders]
clRIFFHandler::CalcAllChunks: Ok
Writing Chunk Header 'LIST' Length: 234 ChunkPosition: 70 ChunkDataPos: 78
<-<- [clRIFFHandler::WriteChunkHeaders]
clRIFFHandler::CalcAllChunks: Ok
->-> [clRIFFHandler::WriteChunkHeaders]
clRIFFHandler::CalcAllChunks: Ok
Writing Chunk Header 'id3 ' Length: 57344 ChunkPosition: 312 ChunkDataPos: 320
<-<- [clRIFFHandler::WriteChunkHeaders]
<-<- [clWaveDecoder::WriteIDTags]
<-<- [dBCoreConverter::IDTagWriter]
Communicate [clDecoder::Get]
Communicate [clEncoder::Get]
Conversion completed in 6.3 seconds x33 realtime encoding

**xoas** · 01-28-2011, 12:59 AM

Re: Music Converter converts But...File says 0 size

It's not showing all the Codecs. Very few to choose from.

The install file for dBpoweramp Music Converter does not contain many codecs, (even for the full reference version). Rather than try to cram in as many codecs as possible (most of which are of little or no use to most users) the program is designed to allow you to download and install just those codecs you need. These can be downloaded and installeed from Codec Central (see link at the top of this page).

I'll leave it to Spoon to make out whether the Debug file has the clue to the source of your problem. I'm hopeful that it will.

Best wishes,
Bill

**Spoon** · 01-28-2011, 09:18 AM

Re: Music Converter converts But...File says 0 size

Encoder Cmd Line: -compression="ACM" -bits="16" -freq="16000" -channels="2" -acm="55000200112B0000B80B0000010000000C00010002000 0009C0001000000" -wavemp3="-b 160"

This suggests you are converting to a ACM compression (within the wave file), you are also reading from and to over the network. To narrow the issue:

Copy the file to be converted to your local pc and convert from / to there (this rules out the possibility of the network share having a quota, or incorrect access rights).

Also convert to an uncompressed wave file (everything set 'as is', no frequency reduction to 16KHz). This would highlight wether the ACM codec is at fault.

If you are creating an wave file containing mp3, do not use the ACM option, rather the wave-mp3 option which uses dBpoweramps Encoder not the one built into Windows.

**MusicBug** · 01-28-2011, 12:50 PM

Re: Music Converter converts But...File says 0 size

This may all be true..... But it still isn't converting . I moved a few of the music files over to my laptop & tried to convert again to no avail.:(
I uninstalled R14 off my desktop XP version because it woudn't convert on there either. I put R12.4 back on there & it works perfectly fine. In that version...I have an encoder called MP3. Not MPEG layer 3 as it is here. I wonder if that is the difference.
Still need help:cry:[

**Spoon** · 01-28-2011, 01:03 PM

Re: Music Converter converts But...File says 0 size

That is the issue, you are using the ACM codecs (which are built into Windows), try selecting 'wav-mp3' on the wave compression page.

**MusicBug** · 01-28-2011, 01:16 PM

Re: Music Converter converts But...File says 0 size

OK...Tried the uncompression. This time it converted with all the same settings. Even has a size of 6.55 MB. Is that good ?:confused:

**MusicBug** · 01-28-2011, 01:29 PM

Re: Music Converter converts But...File says 0 size

Wish I could use MP3 setting. But in this version R14....It doesn't give me that option. I wish I could show you a screenshot of the options I do have.:(

CCITT A-Law
CCITT u-Law
GSM 6.10
IMA ADPCM
Messenger Audio Codec
Microsoft ADPCM
MPEG Layer 3
PCM

This is all I have to choose from. So thats why I picked MPEG Layer 3 In my old version... I had the MP3 format

**Spoon** · 01-28-2011, 04:28 PM

Re: Music Converter converts But...File says 0 size

You have tried setting a lower bit rate?

See:

Compressed WAV is missing Mp3 (MPEG 3) option - dBpoweramp Forum

http://forum.dbpoweramp.com/showthread.php?t=16550

Q: I am missing options under Compressed WAV that I had in previous versions. A: Try either a 'Wave' compression and select Wave-Mp3 or install the LAME ACM codec here: http://www.free-codecs.com/download/LAME_ACM_Codec.htm

but it still uses mp3 lame

**MusicBug** · 01-28-2011, 05:55 PM

Re: Music Converter converts But...File says 0 size

YES... I have tried to use a lower bit rate . But then it gives me an error.
I really don't want to download from a site not dbpoweramp. Will there ever be an update to include MP3 in the format list ? I can't give up...cuz I paid a lot of money for this. I could convert with R12.4 on my desktop & send waves to my laptop..... But then I still won't be able to convert when I have the laptop away from home...Which is why I bought R14 in the first place.:(

I would then install R14 on desktop when it is working.