title
Products            Buy            Support Forum            Professional            About            Codec Central
 
Results 1 to 13 of 13

Thread: CD Ripper: Cannot Get Meta Data From AMG?

  1. #1

    Join Date
    Dec 2007
    Posts
    7

    CD Ripper: Cannot Get Meta Data From AMG?

    Gday,
    I have read the sticky on this, disabled my firewalls (Windows and Zonealarm) but still CD Ripper will not use AMG for meta data, which means I cant get cover art of course. Freedb does work though.

    Here are my versions copied to clipboard:

    dBpoweramp Music Converter
    Release 12.4
    Registration Status
    Reference: Registered
    All Media Guide: 363 Days Access Remaining

    What else can I try to get this working? Thanks in advance!

  2. #2
    dBpoweramp Guru LtData's Avatar
    Join Date
    May 2004
    Location
    USA
    Posts
    8,332

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Go into dBpoweramp Configuration, go to the "Music Converter" tab, and enable debug mode. Then start up the CD ripper and let it try to check AMG, then close the CD ripper and paste the contents of the notepad document here.

  3. #3

    Join Date
    Dec 2007
    Posts
    7

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Thanks! But now wehre do I find the notepad document which I presume is an error log?

  4. #4
    Administrator
    Join Date
    Apr 2002
    Posts
    38,878

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Close ripper, then set debug mode on, open cd ripper, insert cd, close ripper and the log is shown.

  5. #5

    Join Date
    Dec 2007
    Posts
    7

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Thanks Spoon. That did it.

    Using SCSI PassThrough [clCDDA::SetCommunication]
    ->-> [frmMain::RefreshTrackListing]
    Quitting Meta Thread: Quit
    ->-> [clCDDA::ReturnDriveList]
    <-<- [clCDDA::ReturnDriveList]
    ->-> [clCDDA::ReadTOC]
    <-<- [clCDDA::ReadTOC]
    <-<- [frmMain::RefreshTrackListing]
    ->-> [frmMain::RefreshTrackListing]
    Quitting Meta Thread: Quit
    ->-> [clCDDA::ReadTOC]
    LBA FirstIndex: 1 last Index: 12
    Type: Audio Track 1 LBA Address: 32 Length: 00:07:55.467
    Type: Audio Track 2 LBA Address: 35692 Length: 00:03:15.400
    Type: Audio Track 3 LBA Address: 50347 Length: 00:04:51.707
    Type: Audio Track 4 LBA Address: 72225 Length: 00:04:48.960
    Type: Audio Track 5 LBA Address: 93897 Length: 00:06:26.133
    Type: Audio Track 6 LBA Address: 122857 Length: 00:09:07.600
    Type: Audio Track 7 LBA Address: 163927 Length: 00:05:26.133
    Type: Audio Track 8 LBA Address: 188387 Length: 00:03:56.067
    Type: Audio Track 9 LBA Address: 206092 Length: 00:07:33.907
    Type: Audio Track 10 LBA Address: 240135 Length: 00:03:41.000
    Type: Audio Track 11 LBA Address: 256710 Length: 00:04:49.426
    Type: Audio Track 12 LBA Address: 278417 Length: 00:05:02.440
    Type: Lead Out LBA Address: 301100
    MSF FirstIndex: 1 last Index: 12
    Type: Audio Track 1 MSF: 0/2/32 Length: 00:07:55.467
    Type: Audio Track 2 MSF: 7/57/67 Length: 00:03:15.400
    Type: Audio Track 3 MSF: 11/13/22 Length: 00:04:51.707
    Type: Audio Track 4 MSF: 16/5/0 Length: 00:04:48.960
    Type: Audio Track 5 MSF: 20/53/72 Length: 00:06:26.133
    Type: Audio Track 6 MSF: 27/20/7 Length: 00:09:07.600
    Type: Audio Track 7 MSF: 36/27/52 Length: 00:05:26.133
    Type: Audio Track 8 MSF: 41/53/62 Length: 00:03:56.067
    Type: Audio Track 9 MSF: 45/49/67 Length: 00:07:33.907
    Type: Audio Track 10 MSF: 53/23/60 Length: 00:03:41.000
    Type: Audio Track 11 MSF: 57/4/60 Length: 00:04:49.426
    Type: Audio Track 12 MSF: 61/54/17 Length: 00:05:02.440
    Type: Lead Out MSF: 66/56/50
    <-<- [clCDDA::ReadTOC]
    ->-> [frmMain::GetMeta]
    ->-> [clMetaData::GetMetaData]
    <-<- [clMetaData::GetMetaData]
    ->-> [frmMain::MetaDataGot]
    Meta Instant Get Pass
    <-<- [frmMain::MetaDataGot]
    Creating Meta Thread
    <-<- [frmMain::GetMeta]
    ->-> [clMetaData::GetMetaData]
    ->-> [clMetaAMG::GetMetaData]
    Requesting Disc Match, Connecting: <-<- [frmMain::RefreshTrackListing]
    Connected, Posting: Error Invalid Responce.
    A
    Requesting Disc Match, Connecting: Connected, Posting: Error Invalid Responce.
    A
    <-<- [clMetaAMG::GetMetaData]
    <-<- [clMetaData::GetMetaData]
    ->-> [frmMain::MetaDataGot]
    Meta Final Pass
    <-<- [frmMain::MetaDataGot]
    ->-> [frmMain::GetMeta]
    ->-> [clMetaData::GetMetaData]
    ->-> [clMetaAMG::GetMetaData]
    Requesting Disc Match, Connecting: Connected, Posting: Error Invalid Responce.
    A
    Requesting Disc Match, Connecting: Connected, Posting: Error Invalid Responce.
    A
    <-<- [clMetaAMG::GetMetaData]
    <-<- [clMetaData::GetMetaData]
    ->-> [frmMain::MetaDataGot]
    Meta Final Pass
    <-<- [frmMain::MetaDataGot]
    <-<- [frmMain::GetMeta]
    ->-> [clMetaData::SaveMetaData]
    <-<- [clMetaData::SaveMetaData]

  6. #6
    Administrator
    Join Date
    Apr 2002
    Posts
    38,878

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Which internet security suite are you using?

  7. #7

    Join Date
    Dec 2007
    Posts
    7

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Zonealarm, but I shut down the firewall and still no joy.

  8. #8
    Administrator
    Join Date
    Apr 2002
    Posts
    38,878

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    The responce seems to indicate something is modifying the data stream and corrupting it.

  9. #9

    Join Date
    Dec 2007
    Posts
    7

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Spoon, I have just uninstalled everything DBPoweramp-related I could find.
    I then went to the registry and deleted everything remotely connected to dbpoweramp.
    Rebooted.
    Reinstalled my registered copy of DBPoweramp (dMC-R12.4-Ref-Registered.exe)
    Reinstalled AMG subscription (it had gone back to the 30 day trial) (dBpoweramp-AMG-2007-xxxxx.exe)
    Opened CD Ripper.

    And it still wont use AMG for meta data at all. Freedb continues to work fine.

    Im stumped. I have also installed all of this on my laptop and the result is the same. So Im now thinking the wireless router might be a culprit, but going through the setup stuff in there I couldnt find anything obvious.

    Cheers,
    Jake

  10. #10
    Administrator
    Join Date
    Apr 2002
    Posts
    38,878

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    It is a shame you cannot try a fresh computer.

  11. #11

    Join Date
    Dec 2007
    Posts
    7

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    Quote Originally Posted by Spoon
    It is a shame you cannot try a fresh computer.
    Umm...as my previous post states, I tried it all on my laptop as well with the same result. So that makes 2 computers.

  12. #12
    dBpoweramp Guru LtData's Avatar
    Join Date
    May 2004
    Location
    USA
    Posts
    8,332

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    I think he means a fresh Windows install.

    When you shut off ZoneAlarm's firewall, does it have other security features that weren't disabled? Have you tried dMC on a machine on your network that doesn't have ZoneAlarm?

  13. #13

    Join Date
    Dec 2007
    Posts
    7

    Re: CD Ripper: Cannot Get Meta Data From AMG?

    I think he means a fresh Windows install.
    Oh, I see! Actually, this is a fresh install. I installed XP2 Pro about 2 weeks ago after a dreadful Vista experience.

    When you shut off ZoneAlarm's firewall, does it have other security features that weren't disabled?
    No. Nothing showing in task manager.

    Have you tried dMC on a machine on your network that doesn't have ZoneAlarm?
    No, Im all out of puters at the moment, but my missus is back home next week and I will try hers even though she also has Zonealarm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •