title
Products            Buy            Support Forum            Professional            About            Codec Central
 
Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26

Thread: Recommended Ultra Secure Ripping Settings?

  1. #16
    dBpoweramp Guru
    Join Date
    May 2004
    Posts
    1,175

    Re: Recommended Ultra Secure Ripping Settings?

    I would think that there should be some sort of algorithm that would be reasonable. The more songs with AR matches, and the higher the number of matches for each of these, the less likely that any songs with just secure are actually secure. I would imagine that the number of C2 errors occurring in these "secure" tracks could also be considered.

  2. #17
    Administrator
    Join Date
    Apr 2002
    Posts
    43,854

    Re: Recommended Ultra Secure Ripping Settings?

    I have seen weird pressings where 10 tracks match AR and one does not, so these would be incorrectly flagged as having errors when they do not.

  3. #18
    dBpoweramp Guru
    Join Date
    May 2004
    Posts
    1,175

    Re: Recommended Ultra Secure Ripping Settings?

    I would just like to see them flagged as possibly insecure or something that indicates a higher level of suspicion, especially if there were C2 errors on the track in question, or not every re-rip matched, ect...

  4. #19
    dBpoweramp Enthusiast chileboy's Avatar
    Join Date
    Nov 2007
    Posts
    96

    Re: Recommended Ultra Secure Ripping Settings?

    Quote Originally Posted by Spoon
    I have seen weird pressings where 10 tracks match AR and one does not, so these would be incorrectly flagged as having errors when they do not.
    This happened to me with James Blunt - Back to Bedlam. The first track rips as Inaccurate, every other track is fine. This with 50+ Confidence on all tracks.

    I was guessing that it was due to the fact that there is a single occurrence of a certain four-letter word in the first track, which is over-dubbed on the non-explicit pressing. Not sure how AR handles that sort of thing, where folks are ripping two nearly-identical versions of the same CD.

    - Mark

  5. #20
    dBpoweramp Guru
    Join Date
    May 2004
    Posts
    1,175

    Re: Recommended Ultra Secure Ripping Settings?

    If you used secure rip and it says the first track is inaccurate it is. The case above is when a track is listed as SECURE but all other tracks are accurate with a high degree. That makes me believe that the track is NOT secure.

  6. #21
    dBpoweramp Enthusiast chileboy's Avatar
    Join Date
    Nov 2007
    Posts
    96

    Re: Recommended Ultra Secure Ripping Settings?

    Quote Originally Posted by EliC
    If you used secure rip and it says the first track is inaccurate it is. The case above is when a track is listed as SECURE but all other tracks are accurate with a high degree. That makes me believe that the track is NOT secure.
    I meant that, as I recalled, everything ripped as Secure, but only the one track showed as Inaccurate (according to AR), which is what I took that to mean.

    I was apparently wrong anyway, I went and re-ripped the CD and it was both Accurate and Secure. Sorry.

    - Mark

  7. #22

    Join Date
    May 2009
    Posts
    2

    Re: Recommended Ultra Secure Ripping Settings?

    Hi Everyone. Just a quick question. (I hope.)

    This guide recommends the ultra secure settings to be:
    If your drive supports C2 pointers, set as Minimum Ultra Passes: 1 Maximum Ultra Passes: 2 End After Clean Passes: 1
    But the help file recommends:
    * Drive Supports c2 error pointers well enable Ultra Secure with Minimum 1, Maximum 6 and End after 1.
    * Drive Supports c2, but badly enable Ultra Secure with Minimum 2, Maximum 6 and End after 2.
    * Drive does not support c2 enable Ultra Secure with Minimum 3, Maximum 6 and End after 2.
    Which one should I follow?

    My drive by the way is: Drive: TSSTcorp - CDDVDW TS-L632H (68 users): 495 Accurate Submissions 4 InAccurate Submissions 99.1984 % Percentage Accuracy.
    Last edited by twostar; 06-30-2009 at 08:58 PM. Reason: added drive model

  8. #23
    Administrator
    Join Date
    Apr 2002
    Posts
    43,854

    Re: Recommended Ultra Secure Ripping Settings?

    2 passes for C2 pointer which are supported well should be enough.

  9. #24
    dBpoweramp Enthusiast
    Join Date
    May 2008
    Location
    Louisville, KY USA
    Posts
    186

    Re: Recommended Ultra Secure Ripping Settings?

    Quote Originally Posted by Spoon View Post
    2 passes for C2 pointer which are supported well should be enough.
    I see alot of comments here regarding how well a drive does (or does not) support C2 pointers. Comments that seem to indicate that for a drive that supports C2 pointers well, Batch Ripper/CD Ripper should be configured to use them. On the other hand those same comments seem to indicate that if the drive does not support C2 well (or at all) they should not be used. I also know that the configuration allows us to test if our drive is reporting C2 pointers.

    Question is, how do we know just how well C2 pointers are implemented by our drive. To further confuse this issue (for me anyway) is the fact that although the drive may support C2 pointers well (according to the both the manufactures documentation and Spoon), dbp may say it does not. I understand that this is usually due, not the drive, but the IDE/firewire or IDE/USB bridge being used. So a drive that supports C2 pointer very well (ie. an older "real" plextor) attached to a USB/IDE or Firewire/IDE bridge which does not may result in sub-standard support of the C2 pointers.

    So again I ask the question how do we know how well our particular setup (drive and any interface hardware) handles C2 pointers. Then once we know that, what level of support for C2 is sufficent to make them worthwhile to use and below what level of support do they cause more harm than good?

  10. #25

    Join Date
    Nov 2008
    Location
    New Jersey
    Posts
    24

    Re: Recommended Ultra Secure Ripping Settings?

    I would like to know the answer to this as well?

  11. #26
    Administrator
    Join Date
    Apr 2002
    Posts
    43,854

    Re: Recommended Ultra Secure Ripping Settings?

    With dBpoweramp you use c2 pointers if supported, unless it is very obvious they are not working well (for example on a unscratched disc it gives lots of frames to re-rip, such as 2000 and this goes away if c2 is disabled).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •